Other Name: Sensor Set, Air Bag; Air Bag Impact Sensor, Front; Air Bag Sensor; Front Sensor; Sensor, Air Bag, Front Passenger Side; Sensor, Air Bag, Front Driver Side
Position: Front
Fits the following Toyota Models:
Avalon | 2013-2015 | Hybrid Limited, Hybrid XLE, Hybrid XLE Premium, Hybrid XLE Touring, Limited, XLE, XLE Premium, XLE Touring, XLE Touring SE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
Other Name: Sensor, Side Air Bag; Air Bag Impact Sensor, Front; Air Bag Sensor; Side Sensor; Sensor Assembly, Side Air Bag, Passenger Side; Sensor Assembly, Side Air Bag, Driver Side
Other Name: Sensor Set, Air Bag; Air Bag Impact Sensor, Front; Air Bag Sensor; Front Sensor; Sensor, Air Bag, Front Passenger Side; Sensor, Air Bag, Front Driver Side; Sensor, Air Bag, Front
Position: Front
Fits the following Toyota Models:
Highlander | 2014-2019 | Hybrid LE, Hybrid Limited, Hybrid Limited Platinum, Hybrid XLE, LE, LE Plus, Limited, Limited Platinum, SE, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
RAV4 | 2013-2018 | Adventure, Hybrid Limited, Hybrid SE, Hybrid XLE, LE, Limited, Platinum, SE, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS
Other Name: Sensor, Air Bag, Front; Air Bag Impact Sensor, Front; Air Bag Sensor; Front Sensor; Sensor, Air Bag, Front Passenger Side; Sensor, Air Bag, Front Driver Side
Position: Front
Fits the following Toyota Models:
Land Cruiser | 2016-2021 | Base, Heritage Edition | 8 Cyl 5.7 L GAS
Other Name: Sensor, Pressure Side; Air Bag Impact Sensor, Center Front; Air Bag Sensor; Side Sensor; Sensor, Side Air Bag Pressure, Passenger Side; Sensor, Side Air Bag Pressure, Driver Side
Manufacturer Note: MARK=ZB
Position: Front Center
Replaces: 8983A-02010
Fits the following Toyota Models:
Corolla | 2020-2022 | Hybrid LE, L, LE, SE, SE Apex, SE Nightshade, XLE, XSE, XSE Apex | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
Other Name: Sensor Set, Air Bag; Air Bag Impact Sensor, Front; Air Bag Sensor; Front Sensor; Sensor, Air Bag, Front Passenger Side; Sensor, Air Bag, Front Driver Side
Position: Front
Fits the following Toyota Models:
Camry | 2011 | Base, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
Other Name: Sensor Set, Air Bag; Air Bag Impact Sensor, Front; Air Bag Sensor; Front Sensor; Sensor, Air Bag, Front Passenger Side; Sensor, Air Bag, Front Driver Side
Position: Front
Fits the following Toyota Models:
Camry | 2012 | Hybrid LE, Hybrid XLE, L, LE, SE, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
Other Name: Sensor, Side Air Bag; Air Bag Sensor; Side Sensor; Sensor Assembly, Side Air Bag, Passenger Side; Sensor Assembly, Side Air Bag, Driver Side
Fits the following Toyota Models:
Sequoia | 2018-2022 | Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
Other Name: Sensor, Side Air Bag; Air Bag Impact Sensor, Front; Air Bag Sensor; Side Sensor; Sensor Assembly, Side Air Bag, Passenger Side; Sensor Assembly, Side Air Bag, Driver Side
Position: Front
Fits the following Toyota Models:
Tundra | 2007-2013 | Base, Limited, Platinum, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
Other Name: Sensor, Air Bag, Front; Air Bag Impact Sensor, Front; Air Bag Sensor; Front Sensor; Sensor, Air Bag, Front Passenger Side; Sensor, Air Bag, Front Driver Side
Manufacturer Note: MARK = RA
Position: Front
Fits the following Toyota Models:
RAV4 | 2021-2023 | Adventure, Hybrid LE, Hybrid Limited, Hybrid SE, Hybrid XLE, Hybrid XLE Premium, Hybrid XSE, LE, Limited, TRD Off-Road, XLE, XLE Premium | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS
Other Name: Sensor, Side Air Bag; Air Bag Impact Sensor, Rear; Air Bag Sensor; Side Sensor; Sensor, Side Air Bag, Passenger Side; Sensor, Side Air Bag, Driver Side
Manufacturer Note: MARK=69
Position: Rear
Fits the following Toyota Models:
Corolla | 2020-2022 | Hybrid LE, L, LE, SE, SE Apex, SE Nightshade, XLE, XSE, XSE Apex | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
Other Name: Sensor, Air Bag, Front; Air Bag Impact Sensor, Front; Air Bag Sensor; Front Sensor; Sensor, Air Bag, Front Passenger Side; Sensor, Air Bag, Front Driver Side
Manufacturer Note: DENSO
Position: Front
Fits the following Toyota Models:
Corolla | 2012 | L, LE, S | 4 Cyl 1.8 L GAS
RAV4 | 2006-2011 | Base, Limited, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
Other Name: Sensor, Air Bag, Front; Air Bag Impact Sensor; Air Bag Sensor; Front Sensor; Sensor, Air Bag, Front Passenger Side; Sensor, Air Bag, Front Driver Side
Position: Front
Fits the following Toyota Models:
Sienna | 2004-2010 | CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
Q: How to replace the Front Right Air Bag Sensor on Toyota 4Runner?
A: Prior to replacing the Front Right Air Bag Sensor you must handle the Front Air Bag Systems service with care. Start by detaching the negative battery terminal before removing the radiator grille. Separate the Air Bag Front RH Sensor by undoing its two bolts while disconnecting the connector. You should perform a visual inspection of the Air Bag Front RH Sensor after its removal. You must wait at least 90 seconds of disconnected battery negative terminal time after you remove it while the ignition switch stays in the OFF position. Use the 2 bolts to install the Air Bag Front RH Sensor while torquing them to 7.5 N.m (76 kgf.cm, 66 in.lbf) and reconnect the connector. The SRS warning light should be checked followed by an installation play evaluation.
Q: How to replace the Air Bag Sensor Assembly on Toyota Camry?
A: Start replacing the Air Bag Sensor Assembly after disconnecting the battery negative terminal while taking proper safety measures. Start by removing the console panel upper rear and console box carpet as well as the rear console box and instrument panel cup holder tray without ashtray and the instrument panel ash receptacle assembly with ashtray. Proceed then by removing the console panel upper followed by the console box front along with air duct rear No.1 and No.2 and Console box duct No.1 specifically for auto air conditioner systems. Unplug the three connectors from the air bag sensor assembly center before removing its three retaining bolts. Testing of the air bag sensor assembly center must be completed before reinstall. After removal of the battery negative terminal you should wait 90 seconds with the ignition switch off. Secure the air bag sensor assembly center to its installation position using temporary 3 bolts until they reach 17.5 N.m (178 kgf.cm, 13 ft.lbf) torque value. Connect the connector to the air bag sensor assembly center and check for proper water-proof sheet placement without any loose fitting. Before closing the check execute an inspection of the SRS warning light operation.
Q: How to replace the Seat Position Air Bag Sensor for the bench seat type on Toyota Tacoma?
A: Prior to replacing the Seat Position Air Bag Sensor on a bench seat type you must follow the necessary safety precautions related to Air Bag systems. Let the negative battery cable disconnect while the system waits at least 90 seconds to avoid the Air Bag deployment. Disconnect the connector which connects to the seat position Air Bag sensor after disconnecting the seat assembly unit. A torx(R) socket wrench (T30) can be used to uninstall the torx(R) screw and sensor together. All installation steps involving the new seat position Air Bag sensor must begin with an OFF ignition switch and disconnected negative battery cable that remains disconnected for at least 90 seconds. Install connectors when the sensor assembly is present according to the specified torque requirements and make sure the sensor assembly stays unharmed during this process. Prior to screw the torx(R) screw use 8.0 N.m (82 kgf.cm, 71 in.lbf) of torque while verifying no material slack exists for a sensor-seat rail clearance between 0.6mm (0.023 in.) and 2 mm (0.079 in.). The cable connection to the negative battery terminal requires a torque of 3.9 N.m (40 kgf.cm, 35 in.lbf) and the SRS warning light inspection should be performed at that time.