How to remove and install the Air Bag sensor assembly on Toyota MR2 Spyder?

In order to remove Air Bag sensor assembly, remove floor carpet and disconnect wire clamp and connectors and screws with Torx. Install a new sensor assembly with the genuine torque, re-connect components and secure SRS wiring is in place and intact.

How to service and repair the front Air Bag sensor on Toyota MR2 Spyder?

In order to service the front Air Bag sensor, the luggage compartment trim and tool box should be removed. Unscrew and disassemble the left and right sensors, then mount the new screws with four bolts at 20 N. m. and make sure they are connected and correctly oriented after which the trim and tool box can be returned. Inspect and change where necessary.

OEM Toyota MR2 Spyder Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Air Bag Sensors found

View related parts
Toyota MR2 Spyder Front Sensor, Driver Side
Part Number: 89174-19135
$99.97 MSRP: $120.53
You Save: $20.56 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Bag, Front; Air Bag Impact Sensor, Left; Air Bag Sensor; Sensor, Air Bag, Front Driver Side
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2005 Toyota MR2 Spyder | Base | 4 Cyl 1.8 L GAS
View related parts
Toyota MR2 Spyder Front Sensor, Driver Side
Part Number: 89174-19115
$99.97 MSRP: $120.53
You Save: $20.56 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Bag, Front; Air Bag Impact Sensor, Left; Air Bag Sensor; Sensor, Air Bag, Front Driver Side
- Position: Front Driver Side
- Replaces: 89174-19025
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2003 Toyota MR2 Spyder | Base | 4 Cyl 1.8 L GAS
View related parts
Toyota MR2 Spyder Front Sensor, Passenger Side
Part Number: 89173-19335
$99.97 MSRP: $120.53
You Save: $20.56 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Bag, Front; Air Bag Impact Sensor, Right; Air Bag Sensor; Sensor, Air Bag, Front Passenger Side
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2005 Toyota MR2 Spyder | Base | 4 Cyl 1.8 L GAS
View related parts
Toyota MR2 Spyder Front Sensor, Passenger Side
Part Number: 89173-19315
$99.97 MSRP: $120.53
You Save: $20.56 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Bag, Front; Air Bag Impact Sensor, Right; Air Bag Sensor; Sensor, Air Bag, Front Passenger Side
- Position: Front Passenger Side
- Replaces: 89173-19215
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2003 Toyota MR2 Spyder | Base | 4 Cyl 1.8 L GAS

Toyota MR2 Spyder Air Bag Sensor

If you're thinking about purchasing OEM parts for your Toyota MR2 Spyder, our website is your one-stop destination. We stock an extensive selection of genuine Toyota MR2 Spyder Air Bag Sensor at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota MR2 Spyder Air Bag Sensor Parts and Q&A

Front Sensor, Passenger Side
89173-19315
Q: How to remove and install the Air Bag sensor assembly on Toyota MR2 Spyder?
A: In order to remove Air Bag sensor assembly, remove floor carpet and disconnect wire clamp and connectors and screws with Torx. Install a new sensor assembly with the genuine torque, re-connect components and secure SRS wiring is in place and intact.
Front Sensor, Driver Side
89174-19115
Q: How to service and repair the front Air Bag sensor on Toyota MR2 Spyder?
A: In order to service the front Air Bag sensor, the luggage compartment trim and tool box should be removed. Unscrew and disassemble the left and right sensors, then mount the new screws with four bolts at 20 N. m. and make sure they are connected and correctly oriented after which the trim and tool box can be returned. Inspect and change where necessary.