Other Name: Switch, Hazard Warning Signal; Hazard Warning Switch; Hazard Flasher Switch; Switch Assembly, Hazard Warning Signal
Fits the following Toyota Models:
Camry | 2021-2024 | Hybrid LE, Hybrid SE, Hybrid SE Nightshade, Hybrid XLE, Hybrid XSE, LE, SE, SE Nightshade, TRD, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
Other Name: Switch, Hazard Warning Signal; Hazard Warning Switch; Hazard Flasher Switch; Switch Assembly, Hazard Warning Signal
Fits the following Toyota Models:
Camry | 2018-2020 | Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, SE Nightshade, TRD, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
Other Name: Lamp Assembly, Telltale; Driver Information Display
Position: Driver Side
Fits the following Toyota Models:
RAV4 | 2017-2018 | Adventure, Hybrid Limited, Hybrid SE, Hybrid XLE, LE, Limited, Platinum, SE, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS
Other Name: Lamp Assembly, Telltale; Passenger Air Bag Disable Switch
Position: Passenger Side
Fits the following Toyota Models:
Corolla | 2019-2022 | Hybrid LE, L, LE, SE, SE Apex, SE Nightshade, XLE, XSE, XSE Apex | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
Q: How to service and repair the Hazard Warning Switch on Toyota Camry?
A: Service and repair procedures on the Hazard Warning Switch require initial Instrument Panel No. 2 Register Assembly removal followed by the disengagement of its 4 claws prior to removing the hazard warning signal switch assembly. You should first install the 4 claws to mount the hazard warning signal switch assembly before you install the Instrument Panel No. 2 Register.
Q: How to remove the Hazard Warning Switch on Toyota Corolla?
A: The first step for Hazard Warning Switch removal consists of removing the lower instrument panel finish panel LH, then the lower instrument panel finish panel RH. Start with removing the instrument panel finish panel end LH then proceed to removing the instrument panel finish panel end RH. The next action requires removal of the center instrument panel register assembly. The process ends with removing the hazard warning signal switch assembly after loosening its 2 claws.
Q: How to remove the Hazard Warning Switch on Toyota Tundra?
A: The first step to uninstall the Hazard Warning Switch requires the removal of the Instrument Cluster Finish Panel Assembly. The switch removal starts with disconnecting its two claws.