Other Name: Coil, Ignition; Coil Assembly, Ignition
Fits the following Toyota Models:
Camry | 1984-1991 | Base, DLX, DLX All Trac, LE, LE All Trac | 4 Cyl 1.8 L DIESEL, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS
Celica | 1986-1989 | GT, ST | 4 Cyl 2.0 L GAS
Corolla | 1984-1989 | Base, DLX, DLX All Trac, FX, FX16, FX16 GTS, GTS, LE, LE Limited, Sport DLX, Sport GTS, Sport SR5, SR5, SR5 All Trac | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L DIESEL
Tercel | 1990, 1984-1988 | Base, DLX, DX, EZ, SR5, STD | 4 Cyl 1.5 L GAS
Van | 1984-1989 | Wagon Crg, Wagon DX, Wagon LE | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS
Other Name: Coil, Ignition; Direct Ignition Coil; Direct Ignition Coil OE Quality; Coil Assembly, Ignition
Fits the following Toyota Models:
Corolla | 2020-2022 | Hybrid LE | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV)
Prius | 2016-2022 | 2020 Edition, Four, Four Touring, L Eco, LE, Limited, One, Three, Three Touring, Two, Two Eco, XLE | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV)
Prius AWD-e | 2019-2022 | LE, XLE | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV)
Prius Prime | 2017-2022 | Advanced, LE, Limited, Plus, Premium, XLE | 4 Cyl 1.8 L PLUG-IN HYBRID EV-GAS (PHEV)
Q: How to Service and Repair an Ignition Coil on Toyota 4Runner?
A: The first step to work on an ignition coil involves removing the air cleaner hose before you disconnect the high-tension cords from each coil. After disconnecting the 3 connectors from the ignition coils you can remove the 3 ignition coils from the LH cylinder head by unscrewing their bolts and follow an ordered arrangement of ignition coils during disassembly. Secure the 3 ignition coils onto the LH cylinder head by using the 3 bolts while torquing them to 7.8 Nm (80 kg.cm, 69 in.lb) before reattaching the 3 connectors to the ignition coils. As the last step connect the igniter to the high-tension cords before putting back the air cleaner hose.
Q: How to install the ignition coil assembly on Toyota Camry?
A: You need to install the 4 ignition coils of the 2AZ-FE engine by using 4 bolts while tightening them to 9.0 Nm (92 kgf-cm, 80 in-lbf). The fourth step requires attaching the four ignition coil connectors. The initial step requires fitting the No. 1 engine cover. Complete the process by attaching the cable to the negative terminal of the battery.
Q: How to replace the ignition coil on Toyota Tacoma?
A: The replacement process starts with air cleaner hose removal followed by high-tension cord unattachment from ignition coils. First disconnect the connector from the ignition coil before removing its bolt to extract the ignition coil from the LH cylinder head. Position the new ignition coil onto the spark plug before mounting it to the cylinder head cover so that you can fasten it using the provided bolt tightened to 7.8 N.m (80 kgf.cm, 69 in.lbf). Attach the high-tension cords next to the ignition coils before reinstating the air cleaner hose.