How to remove the ignition coil and spark plugs on Toyota Highlander?

The first step to remove ignition coil and spark plugs from the 2GR-FE engine requires two essential removals of the engine under cover assembly and the No.1 engine under cover. You must start by draining the engine coolant before taking out the V-bank cover sub-assembly. The sequence requires starters to remove front wiper assemblies and windshield wiper components then cowl ventilators and windshield wiper motor units before outer cowl top panel sub-assemblies. The procedure starts by eliminating the engine room main wire before getting rid of the throttle body bracket along with the No. 1 surge tank stay and air cleaner cap sub-assembly and intake air surge tank assembly. Take out the ignition coil assembly by unbolting all 4 screws labeled [A] along with removing the nut [B] and disconnecting the two harness clamps labeled [C] and then disconnecting all six ignition coil connectors which leads to removing the total of 6 ignition coil bolts and 6 ignition coils cw. The final step of the process requires removing the six spark plugs.

How to install the ignition coil and spark plugs on Toyota Highlander?

A spark plug installer with torque tools should set 4 spark plugs into place on the 1AR-FE engine with 25 Nm of torque force (254 kgf-cm, 18 foot pounds). Install 4 ignition coil assemblies by using 4 bolts while tightening to 10 Nm using the torque values of 102 kgf-cm or 7 ft-lbf. Then connect the 4 ignition coil assembly connectors. The last step in the procedure includes installing the No. 1 engine cover sub-assembly.

OEM Toyota Highlander Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Ignition Coils found

View related parts
Toyota Highlander Ignition Coil
Part Number: 90919-02266
$92.77 MSRP: $130.23
You Save: $37.46 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Coil, Ignition; Direct Ignition Coil; Direct Ignition Coil OE Quality; Coil; Coil Assembly, Ignition
- Replaces: 90919-02244, 90080-19023, 90919-02243
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2007 Toyota Highlander | Base | 4 Cyl 2.4 L GAS
View related parts
Toyota Highlander Ignition Coil
Part Number: 90919-A2013
$90.88 MSRP: $127.56
You Save: $36.68 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil, Ignition; Direct Ignition Coil; Coil Assembly, Ignition
- Manufacturer Note: TYPE B:REFER ILLUST.
- Replaces: 90919-02251, 90919-A2004, 90919-02280, 90919-A2007, 90919-A2002
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2022 Toyota Highlander | Base, Hybrid, Hybrid LE, Hybrid Limited, Hybrid Limited Platinum, Hybrid XLE, L, LE, LE Plus, Limited, Limited Platinum, Platinum, Plus, SE, Sport, XLE, XSE | 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
Toyota Highlander Coil Assembly, Ignition
Part Number: 90919-A2010
$106.05 MSRP: $148.85
You Save: $42.80 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil, Ignition; Direct Ignition Coil; Ignition Coil
- Replaces: 90919-02277
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020-2023 Toyota Highlander | Hybrid Bronze Edition, Hybrid LE, Hybrid Limited, Hybrid Platinum, Hybrid XLE, L, LE, Limited, Platinum, XLE, XSE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Highlander Ignition Coil, White
Part Number: 90919-A2008
$95.85 MSRP: $134.55
You Save: $38.70 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil, Ignition; Direct Ignition Coil; Direct Ignition Coil OE Quality; Coil Assembly, Ignition
- Manufacturer Note: TYPE A:REFER ILLUST.
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2017-2022 Toyota Highlander | L, LE, LE Plus, Limited, Limited Platinum, Platinum, SE, XLE, XSE | 6 Cyl 3.5 L GAS
View related parts
Toyota Highlander Coil Assembly, Ignition
Part Number: 90919-A2005
$91.47 MSRP: $128.39
You Save: $36.92 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Coil, Ignition; Direct Ignition Coil; Ignition Coil
- Replaces: 90919-02256, 90919-A2003, 90919-02255
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2019 Toyota Highlander | Base, LE, Plus, SE | 4 Cyl 2.7 L GAS
View related parts
Toyota Highlander Ignition Coil
Part Number: 90919-02246
$101.07 MSRP: $141.87
You Save: $40.80 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil, Ignition; Direct Ignition Coil; Direct Ignition Coil OE Quality; Coil Assembly, Ignition
- Manufacturer Note: (J)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2010 Toyota Highlander | Base, Hybrid, Hybrid Limited, Limited, Sport | 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS
View related parts
Toyota Highlander Coil Assembly, Ignition
Part Number: 90919-02234
$116.47 MSRP: $163.50
You Save: $47.03 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Coil, Ignition; Direct Ignition Coil; Ignition Coil
- Manufacturer Note: (J)
- Replaces: 90080-19016
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2003 Toyota Highlander | Base, Limited | 6 Cyl 3.0 L GAS

Toyota Highlander Ignition Coil

Choose genuine Ignition Coil that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Ignition Coil for your Toyota Highlander? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Highlander parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

The Toyota Highlander Ignition Coil is an important part that has a significant function in a vehicle ignition system. Thus transforming the low voltage from the battery to high voltage power the ignition coil produces the spark that is required to ignite the fuel in the combustion chamber of the engine. This process will imply two coils of insulated copper wire: the primary one and the secondary one having an iron core within a housing. Primary circuit comes in contact with battery and triggering device, while the second circuit is made up of high tension lead in addition to the spark plug wires. There are types of the igniting coils, for example, the ones used in the distributor ignition measurement or coil-on-plug measurement are used in some Highlander models, and besides, they are characterized by their work and advantages. Checking the ignition coil as well as having it serviced frequently can help solve the problems associated with bad ignition coil, for instance, misfire, poor fuel efficiency, or power output shortfall.

Toyota Highlander Ignition Coil Parts and Q&A

Ignition Coil
90919-02246
Q: How to remove the ignition coil and spark plugs on Toyota Highlander?
A:
The first step to remove ignition coil and Spark Plugs from the 2GR-FE engine requires two essential removals of the engine under cover assembly and the No.1 engine under cover. You must start by draining the engine coolant before taking out the V-bank cover sub-assembly. The sequence requires starters to remove front wiper assemblies and windshield wiper components then cowl ventilators and windshield Wiper Motor units before outer cowl top panel sub-assemblies. The procedure starts by eliminating the engine room main wire before getting rid of the throttle body bracket along with the No. 1 surge tank stay and air cleaner cap sub-assembly and intake air surge tank assembly. Take out the ignition coil assembly by unbolting all 4 screws labeled [A] along with removing the nut [B] and disconnecting the two harness clamps labeled [C] and then disconnecting all six ignition coil connectors which leads to removing the total of 6 ignition coil bolts and 6 ignition coils cw. The final step of the process requires removing the six spark plugs.
Ignition Coil
90919-A2013
Q: How to install the ignition coil and spark plugs on Toyota Highlander?
A:
A Spark Plug installer with torque tools should set 4 spark plugs into place on the 1AR-FE engine with 25 Nm of torque force (254 kgf-cm, 18 foot pounds). Install 4 ignition coil assemblies by using 4 bolts while tightening to 10 Nm using the torque values of 102 kgf-cm or 7 ft-lbf. Then connect the 4 ignition coil assembly connectors. The last step in the procedure includes installing the No. 1 engine cover sub-assembly.