Q: How to remove the Emblem without causing damage on Toyota Camry?
A: You need to heat both the vehicle body and name plate with a heat light yet avoid overheating them. First secure protective tape around the No. 2 luggage compartment door name plate before you place piano wire between the vehicle body and name plate. The piano wire needs wooden blocks fastened at its ends prior to pulling it to dislodge double-sided tape from the name plate which must be extracted in a controlled manner to preserve both the name plate and body of the vehicle. The same treatment should be applied to the back door name plate and side panel emblem by using protective tape, a piano wire and proper removal techniques to prevent damage to both items and their supporting vehicle structure.
Q: How to remove the No. 1 back door emblem and the No. 4 luggage compartment door name plate without damaging them or the body on Toyota Corolla?
A: Before removing the No. 1 back door emblem it is essential to place protective tape around it. A piano wire should be inserted between the vehicle body and the emblem while wooden blocks need to be tied to both ends of the wire to function as handles. The piano wire tension cuts through double-sided tape that fastens the emblem to the vehicle but should not harm the emblem or body of the vehicle. After cutting, remove the emblem. Repeating the process on the No. 4 luggage compartment door name plate involves applying protective tape followed by wiring the double-sided tape removal using piano wires and hand ties to extract the plate properly from its position. Protective tape needs to be applied after which a piano wire gets implemented and workers must be cautious when removing both the name plate and the vehicle body from No. 1 luggage compartment door.
Q: What does the body emblem service and repair process involve on Toyota Tundra?
A: The body emblem service requires technicians to carefully handle and put in new name plates. Prepare the work area for name plate replacement by removing all dirt and objects. Separate the part with right tools to avoid hurting the base material. Set the new name plate correctly then attach it to the body using suitable fasteners and adhesive. Use enough pressure to attach the new name plate firmly on the body surface.