Other Name: Plate, Luggage Compartment Door; Deck Lid Emblem, Rear; Plate, Luggage Compartment Door Name
Position: Rear
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2020-2023 Toyota Corolla | Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, SE Apex, SE Nightshade, XLE, XSE, XSE Apex | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
Other Name: Plate, Luggage Compartment Door; Deck Lid Emblem, Rear; Plate, Luggage Compartment Door Name
Manufacturer Note: VE
Position: Rear
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
1998-2000 Toyota Corolla | VE | 4 Cyl 1.8 L GAS
| Page 1 of 7 |Next >
1-20 of 122 Results
Toyota Corolla Emblem
Choose genuine Emblem that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Emblem for your Toyota Corolla? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Corolla parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.
Q: How to remove the No. 1 back door emblem and the No. 4 luggage compartment door name plate without damaging them or the body on Toyota Corolla?
A:
Before removing the No. 1 back door emblem it is essential to place protective tape around it. A piano wire should be inserted between the vehicle body and the emblem while wooden blocks need to be tied to both ends of the wire to function as handles. The piano wire tension cuts through double-sided tape that fastens the emblem to the vehicle but should not harm the emblem or body of the vehicle. After cutting, remove the emblem. Repeating the process on the No. 4 luggage compartment door name plate involves applying protective tape followed by wiring the double-sided tape removal using piano wires and hand ties to extract the plate properly from its position. Protective tape needs to be applied after which a piano wire gets implemented and workers must be cautious when removing both the name plate and the vehicle body from No. 1 luggage compartment door.
Q: How to install the No. 1 luggage compartment door name plate and the No. 1 back door emblem on Toyota Corolla?
A:
The first step to install the No. 1 luggage compartment door name plate requires you to clean the vehicle body surface by applying heat from a light until removing double-sided tape followed by cleaning off past adhesive. To use a name plate again you should heat it while removing the double-sided tape and cleaning off residue before adding fresh double-sided tape. Heating the vehicle body alongside the name plate allows you to remove the backing paper from the name plate prior to installation by keeping the adhesive traces free from contamination. The procedure should be repeated with the No. 4 luggage compartment door name plate after completing the same cleaning tasks and installation steps. When cleaning the vehicle body for the No. 1 back door emblem users should also clean the emblem for reuse or apply new double-sided tape according to requirements. Heating both the vehicle and emblem allows you to remove the release paper before installing the emblem by keeping the adhesive clean of foreign substances.