Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
1995-1996 Toyota Land Cruiser | Base | 6 Cyl 4.5 L GAS
| Page 1 of 2 |Next >
1-20 of 31 Results
Toyota Land Cruiser Emblem
Choose genuine Emblem that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Emblem for your Toyota Land Cruiser? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Land Cruiser parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.
Q: How to install the emblem, rear body name plate, and back door name plate on Toyota Land Cruiser?
A:
The emblem and rear body name plate require a heat light for pre-heating the car body and all installation components while adding double-sided tape. Start with cleaning the surface of the vehicle before heating it with a heat light. Remove the double-sided tape while using cleaner to dissolve remaining adhesive. Prior to emblazoning the emblem you need to apply heat to both the vehicle body and the emblem while removing the paper on its face and positioning the bosses correctly before applying firm pressure for installation. Apply this process to place the rear body name plate by first cleaning and heating the surface and afterward removing the tape followed by proper installation at its designated spot after firm placement. Last, clean and heat the back door name plate then remove its peeling paper before installation at the proper position using firm pressing to make it secure.
Q: How to remove the emblem and back door name plate on Toyota Land Cruiser?
A:
Heating the vehicle components including emblem and rear body name plate and back door name plate with a heat light is necessary before removal. Ensure components do not exceed safe heating levels. Protective tape should be applied first before inserting piano wire into the emblem's area while maintaining the boss position in mind. The process of removing the emblem starts by wrapping wooden blocks to both ends of the piano wire while using it to remove double-sided tape from the emblem before gradually lifting it without scratching the vehicle body. Protective tape should be applied to the rear body name plate before inserting a piano wire between it and the vehicle body for handle attachment which can be used to remove the double-sided tape allowing extraction of the rear body name plate. The same method should be used for back door name plate removal through protective tape application followed by piano wire insertion and handle tying before wire tension to remove the tape leads to back door name plate removal.