Other Name: Plate, Back Door Name; Hatch Emblem, Rear; Plate, Luggage Compartment Door
Manufacturer Note: AWD
Position: Rear
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2014-2019 Toyota Highlander | Hybrid LE, Hybrid Limited, Hybrid Limited Platinum, Hybrid XLE, LE, LE Plus, Limited, Limited Platinum, SE, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
Other Name: Plate, Luggage Compartment Door; Hatch Emblem, Rear; Plate, Back Door Name
Manufacturer Note: HIGHLANDER
Position: Rear
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2001-2007 Toyota Highlander | Base, Hybrid, Hybrid Limited, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS
Other Name: Plate, Back Door Name; Hatch Emblem, Rear; Plate, Luggage Compartment Door
Manufacturer Note: AWD
Position: Rear
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2020-2023 Toyota Highlander | Hybrid Bronze Edition, Hybrid LE, Hybrid Limited, Hybrid Platinum, Hybrid XLE, L, LE, Limited, Platinum, XLE, XSE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
Other Name: Plate, Front Fender Name; Fender Emblem, Front Left; Door Emblem, Front Left; Plate, Door Name, Driver Side
Position: Driver Side
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2011-2019 Toyota Highlander | Hybrid, Hybrid LE, Hybrid Limited, Hybrid Limited Platinum, Hybrid XLE | 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV)
| Page 1 of 4 |Next >
1-20 of 61 Results
Toyota Highlander Emblem
If you're thinking about purchasing OEM parts for your Toyota Highlander, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Highlander Emblem at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.
Q: How to install a new name plate and emblem on Toyota Highlander?
A: The process of changing the name plate and emblem requires heating the vehicle body and parts and cleaning the surface and removing the tape and the remainder. Warm the emblem, take away its release paper and then place it. Apply to all name plates, to be clean and with standard measurements to the sport and the limited plates.
Q: How to remove the body emblem and name plates without damaging the body on Toyota Highlander?
A: Heat the vehicle body, emblem, and name plates with a heat lamp, avoiding overheating. Apply protective tape around each piece, then use a moulding remover to lift the double-sided tape and remove parts without damaging the body. Repeat for the symbol emblem; No.2, No.4, and back-door plates; and front-door plate.