How to remove the front Sway Bar Kit on Toyota 4Runner?

The first step to remove the front sway bar kit includes disassembling the front disc wheel. To detach the front sway bar link assembly LH the technician must remove two nuts while using a hexagon (6 mm) wrench for stud stabilization in case the ball joint rotates with one of the nuts. Perform the same step to take off the front sway bar link assembly from the right-hand side. The front sway bar bracket No. 2 LH can be removed after removing its two bolts. The front sway bar bracket No. 1 RH requires the same procedure already used for the LH side. The removal sequence requires detachment of the 2 front sway bar bush No. 1. To finish the process remove the sway bar kit front.

How to install the rear Sway Bar Kit on Toyota 4Runner?

You must start by fitting the two sway bar bushes onto the sway bar kit while placing the sway bar bush towards the inside of the sway bar kit stopper. Use 4 bolts to attach the sway bar kit with its 2 sway bar brackets while torquing them to 30 Nm (306 kgf-cm, 22 ft-lbf). Starting with the LH side sway bar link installation use the nut then torque it to 70 Nm (714 kgf-cm, 52 ft-lbf) except in cases where the ball joint rotates with the nut require a 6 mm hexagon wrench to stabilize the stud. The procedure requires attaching the retainers followed by the cushion to the sway bar link while using a wrench to hold the link before installing the nut and link assembly while torquing to 15 Nm (153 kgf-cm, 11 ft-lbf). When removing the rear sway bar link assembly you must use the same methods that were applied for the right-hand side. The last step involves putting on the rear wheel before torquing it to 112 Nm (1,137 kgf-cm, 83 ft-lbf).

OEM Toyota 4Runner Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

22 Sway Bar Kits found

View related parts
Toyota 4Runner Stabilizer Bar, Front
Part Number: 48811-60390
$310.23 MSRP: $442.94
You Save: $132.71 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2016-2023 Toyota 4Runner | 40th Anniversary Edition, Limited, Nightshade, SR5, SR5 Premium, Trail, TRD Off-Road, TRD Off-Road Premium, TRD Pro, TRD Sport, Venture | 6 Cyl 4.0 L GAS
View related parts
Toyota 4Runner Bar, Stabilizer, Rear
Part Number: 48812-60200
$230.54 MSRP: $329.16
You Save: $98.62 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sway Bar
- Position: Rear
- Replaces: 48812-60190
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2009 Toyota 4Runner | Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Toyota 4Runner Stabilizer Bar, Front
Part Number: 48811-35450
$163.78 MSRP: $231.86
You Save: $68.08 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2023 Toyota 4Runner | 40th Anniversary Edition, Limited, Nightshade, SR5, SR5 Premium, Trail, TRD Off-Road, TRD Off-Road Premium, TRD Pro, TRD Sport, Venture | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Toyota 4Runner Bar, Stabilizer, Front
Part Number: 48811-60340
$304.87 MSRP: $435.29
You Save: $130.42 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sway Bar
- Manufacturer Note: TRAIL PACKAGE&STABILIZER-KDSS
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2015 Toyota 4Runner | Limited, SR5, Trail, TRD Pro | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Toyota 4Runner Stabilizer Bar, Front
Part Number: 48811-60230
$168.01 MSRP: $237.84
You Save: $69.83 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar; Bar, Stabilizer, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2009 Toyota 4Runner | Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Toyota 4Runner Bar, Stabilizer, Front
Part Number: 48811-60240
$168.01 MSRP: $237.84
You Save: $69.83 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer; Sway Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2009 Toyota 4Runner | Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Toyota 4Runner Stabilizer Bar, Rear
Part Number: 48812-60300
$98.34 MSRP: $138.04
You Save: $39.70 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2023 Toyota 4Runner | 40th Anniversary Edition, Limited, Nightshade, SR5, SR5 Premium, Trail, TRD Off-Road, TRD Off-Road Premium, TRD Pro, TRD Sport, Venture | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Toyota 4Runner Stabilizer Bar, Front
Part Number: 48811-35460
$172.36 MSRP: $244.00
You Save: $71.64 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2023 Toyota 4Runner | 40th Anniversary Edition, Limited, Nightshade, SR5, SR5 Premium, Trail, TRD Off-Road, TRD Off-Road Premium, TRD Pro, TRD Sport, Venture | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Toyota 4Runner Stabilizer Bar, Rear
Part Number: 48812-35100
$111.85 MSRP: $157.00
You Save: $45.15 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1996-2002 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
Toyota 4Runner Stabilizer Bar, Front
Part Number: 48811-35400
$138.29 MSRP: $195.76
You Save: $57.47 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1996-2002 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
Toyota 4Runner Bar, Stabilizer, Rear
Part Number: 48805-60180
$188.25 MSRP: $268.78
You Save: $80.53 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar Sub-Assembly, Rear Stabilizer; Sway Bar
- Manufacturer Note: STABILIZER-KDSS
- Position: Rear
- Replaces: 48805-60160
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2023 Toyota 4Runner | 40th Anniversary Edition, Limited, Nightshade, SR5, SR5 Premium, Trail, TRD Off-Road, TRD Off-Road Premium, TRD Pro, TRD Sport, Venture | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Toyota 4Runner Stabilizer Bar, Rear
Part Number: 48812-35040
$101.16 MSRP: $142.00
You Save: $40.84 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Sway Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1991-1995 Toyota 4Runner | SR5 | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota 4Runner Stabilizer Bar, Front
Part Number: 48811-35350
Product Specifications
- Other Name: Bar, Stabilizer, Front; Sway Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1990-1995 Toyota 4Runner | SR5 | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota 4Runner Stabilizer Bar, Front
Part Number: 48811-35360
Product Specifications
- Other Name: Bar, Stabilizer, Front; Sway Bar
- Manufacturer Note: W(7JJX15 WHEEL)
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1990-1992 Toyota 4Runner | SR5 | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota 4Runner Stabilizer Bar, Rear
Part Number: 48812-35050
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Sway Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1990-1992 Toyota 4Runner | SR5 | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota 4Runner Stabilizer Bar, Rear
Part Number: 48812-35060
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Sway Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1990 Toyota 4Runner | SR5 | 4 Cyl 2.4 L GAS
View related parts
Toyota 4Runner Stabilizer Bar, Front
Part Number: 48811-35240
Product Specifications
- Other Name: Bar, Stabilizer; Sway Bar; Bar, Stabilizer, Front
- Position: Front
- Replaces: 48811-35190
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1986-1989 Toyota 4Runner | DLX, SR5 | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota 4Runner Stabilizer Bar, Rear
Part Number: 48812-35070
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Sway Bar
- Manufacturer Note: W(7JJX15 WHEEL)
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1990-1995 Toyota 4Runner | SR5 | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota 4Runner Stabilizer Bar, Front
Part Number: 48811-35320
Product Specifications
- Other Name: Bar, Stabilizer, Front; Sway Bar
- Position: Front
- Replaces: 48811-04020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1989-1990 Toyota 4Runner | DLX, SR5 | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota 4Runner Stabilizer Bar, Front
Part Number: 48811-35380
Product Specifications
- Other Name: Bar, Stabilizer, Front; Sway Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1993-1995 Toyota 4Runner | SR5 | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS

| Page 1 of 2 |Next >

1-20 of 22 Results

Toyota 4Runner Sway Bar Kit

Choose genuine Sway Bar Kit that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Sway Bar Kit for your Toyota 4Runner? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota 4Runner parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Toyota 4Runner Sway Bar Kit Parts and Q&A

Stabilizer Bar, Front
48811-60230
Q: How to remove the front Sway Bar Kit on Toyota 4Runner?
A:
The first step to remove the front sway bar kit includes disassembling the front disc wheel. To detach the front sway bar link assembly LH the technician must remove two nuts while using a hexagon (6 mm) wrench for stud stabilization in case the ball joint rotates with one of the nuts. Perform the same step to take off the front sway bar link assembly from the right-hand side. The front sway bar bracket No. 2 LH can be removed after removing its two bolts. The front sway bar bracket No. 1 RH requires the same procedure already used for the LH side. The removal sequence requires detachment of the 2 front sway bar bush No. 1. To finish the process remove the sway bar kit front.
Bar, Stabilizer, Rear
48812-60200
Q: How to install the rear Sway Bar Kit on Toyota 4Runner?
A:
You must start by fitting the two sway bar bushes onto the sway bar kit while placing the sway bar bush towards the inside of the sway bar kit stopper. Use 4 bolts to attach the sway bar kit with its 2 sway bar brackets while torquing them to 30 Nm (306 kgf-cm, 22 ft-lbf). Starting with the LH side sway bar link installation use the nut then torque it to 70 Nm (714 kgf-cm, 52 ft-lbf) except in cases where the Ball Joint rotates with the nut require a 6 mm hexagon wrench to stabilize the stud. The procedure requires attaching the retainers followed by the cushion to the sway bar link while using a wrench to hold the link before installing the nut and link assembly while torquing to 15 Nm (153 kgf-cm, 11 ft-lbf). When removing the rear sway bar link assembly you must use the same methods that were applied for the right-hand side. The last step involves putting on the rear wheel before torquing it to 112 Nm (1,137 kgf-cm, 83 ft-lbf).