Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Toyota 48811-60230
Stabilizer Bar, Front

2003-2009 Toyota 4881160230

Customer Questions & Expert Answers (12)
Toyota 48811-60230 Stabilizer Bar, Front
  • Part Description
    Bar, Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar
  • Part Name Code
    48811
  • Position
    Front
  • Manufacturer
    Toyota
Make sure this part fits
$157.32 MSRP: $222.71
You Save: $65.39 (30%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • 48811-60230 Stabilizer Bar, Front is Ref No. 19 in the diagram below

    2003 Toyota 4Runner Stabilizer Bar, Front Diagram for 48811-60230
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 48811-60230

  • Product Specifications

    BrandGenuine Toyota
    Part Name Code48811
    Manufacturer Part Number48811-60230
    Part DescriptionBar, Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar
    Other NamesBar, Stabilizer, Front
    Item Dimensions44.2 x 12.8 x 5.1 inches
    Item Weight7.50 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerToyota
    SKU48811-60230
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2009 Toyota 4RunnerLimited, Sport, SR56 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
    2007-2009 Toyota FJ CruiserBase, Trail Teams Special Edition, TRD Special Edition6 Cyl 4.0 L GAS

  • Customer Questions & Expert Answers

    Q:
    Will 48811-60230 fit my vehicle? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 48811-60230 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    How to remove the front Sway Bar Kit on Toyota 4Runner? Posted by Customer
    A:
    The first step to remove the front sway bar kit includes disassembling the front disc wheel. To detach the front sway bar link assembly LH the technician must remove two nuts while using a hexagon (6 mm) wrench for stud stabilization in case the ball joint rotates with one of the nuts. Perform the same step to take off the front sway bar link assembly from the right-hand side. The front sway bar bracket No. 2 LH can be removed after removing its two bolts. The front sway bar bracket No. 1 RH requires the same procedure already used for the LH side. The removal sequence requires detachment of the 2 front sway bar bush No. 1. To finish the process remove the sway bar kit front.
    Posted by ToyotaPartsNow Specialist
    Q:
    How do you install the front stabilizer link assembly LH for the 2006 Toyota 4Runner? Posted by Customer
    A:
    Install it with the 2 nuts, torquing to 70 Nm (710 kgf-cm, 52 ft. lbs.); if the ball joint turns with the nut, use a hexagon (6 mm) wrench to hold the stud, then repeat for the front stabilizer link assembly RH.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    What is the torque specification for the nut during installation for the 2005 Toyota 4Runner? Posted by Customer
    A:
    Use a torque wrench to turn the nut continuously at a rate of 2 - 4 seconds per 1 turn, taking the torque reading on the 5th turn, with a turning torque of 0.05 - 2.0 Nm (0.5 - 20 kgf-cm, 0.4 - 17.7 inch lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    What is the procedure for the rear stabilizer link assembly for the 2008 Toyota 4Runner? Posted by Customer
    A:
    Install the stabilizer link on the LH side with the nut, torquing it to 70 Nm (714 kgf-cm, 52 ft-lbf); if the ball joint rotates with the nut, use a 6 mm hexagon wrench to hold the stud.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    How do you install the stabilizer bar for the 2004 Toyota 4Runner? Posted by Customer
    A:
    Place the 2 stabilizer bushes onto the stabilizer bar, ensuring the inner side of the bush is against the bush stopper, then install the stabilizer bar and the 2 stabilizer brackets with the 4 bolts, torquing to 30 Nm (306 kgf-cm, 22 ft. lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    What is the procedure for installing the stabilizer link on the LH side for the 2007 Toyota 4Runner? Posted by Customer
    A:
    Install the stabilizer link on the LH side with the nut, torqued to 70 Nm (714 kgf/cm, 52 ft. lbs.), using a hexagon wrench (6 mm) if necessary.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    What is the torque specification for installing the front stabilizer bracket No.2 LH for the 2003 Toyota 4Runner? Posted by Customer
    A:
    Tighten to 40 Nm (410 kgf-cm, 30 ft. lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    How do you install the stabilizer bar for the 2009 Toyota FJ Cruiser? Posted by Customer
    A:
    Install the stabilizer bar along with the 2 stabilizer brackets using 4 bolts, torquing them to 40 Nm (408 kgf-cm, 30 ft-lbf).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    How do you install the stabilizer bar for the 2008 Toyota FJ Cruiser? Posted by Customer
    A:
    Install the stabilizer bar along with the 2 stabilizer bracket covers using 4 bolts, torquing them to 30 Nm (306 kgf-cm, 22 ft-lbf).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    How do you secure the stabilizer bar for the 2008 Toyota FJ Cruiser? Posted by Customer
    A:
    Install the stabilizer bar along with the 2 stabilizer brackets using 4 bolts, torqued to 40 Nm (408 kgf-cm, 30 ft-lbf).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    How do you detach the front stabilizer link assembly on the left-hand side for the 2007 Toyota FJ Cruiser? Posted by Customer
    A:
    Remove the 2 nuts and stabilizer link; if the ball joint turns with the nut, use a 6 mm hexagon wrench to hold the stud.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Sway Bar Kit
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 48811-60230, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 48811-60230 Stabilizer Bar, Front. It is sometimes referred to as Toyota Sway Bar Kit. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 4881160230 Stabilizer Bar, Front. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery