×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2000 Toyota 4Runner Sway Bar Kit
Stabilizer Sway Bar Set- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Sway Bar Kits found
2000 Toyota 4Runner Stabilizer Bar, Front
Part Number: 48811-35400$138.29 MSRP: $195.76You Save: $57.47 (30%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Part Name Code: 48811
- Item Weight: 7.80 Pounds
- Item Dimensions: 42.9 x 12.1 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-35400
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2000 Toyota 4Runner Stabilizer Bar, Rear
Part Number: 48812-35100$111.85 MSRP: $157.00You Save: $45.15 (29%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Part Name Code: 48812
- Item Weight: 5.00 Pounds
- Item Dimensions: 41.6 x 9.1 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48812-35100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2000 Toyota 4Runner Sway Bar Kit
Looking for affordable OEM 2000 Toyota 4Runner Sway Bar Kit? Explore our comprehensive catalogue of genuine 2000 Toyota 4Runner Sway Bar Kit. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2000 Toyota 4Runner Sway Bar Kit Parts Q&A
- Q: How to service and repair the Sway Bar Kit on 2000 Toyota 4Runner?A: Start sway bar kit service by taking off the front wheels then tighten them to 110 Nm (1,150 kgf.cm, 83 ft. lbs.). The sway bar links need disconnecting through the removal of lower suspension arm nuts which should be tightened to 69 Nm (700 kgf.cm, 51 ft. lbs.). A hexagon wrench should be used to stabilize the stud because it rotates with the nut. Remove the sway bar kit when you disconnect its 2 bolts and nuts and then take out the sway bar kit together with its bushings and brackets by applying a torque of 25 Nm (260 kgf.cm, 19 ft. lbs.). The installation of the 2 brackets and bushings to the sway bar kit should be done by positioning the bushings correctly with the cutout toward the front of the vehicle. To detach the sway bar links suck on the link while removing the nuts and retainers and bushings through application of 19 Nm torque (190 kgf.cm, 14 ft. lbs.). When inspecting the ball joint, start by turning the stud five times between back and forth motions before installing the nut then apply continuous turning pressure on the stud during a 2 - 4 second interval to receive the torque reading at the fifth turn which should range from 0.05 to 2.0 Nm (0.5 to 20 kgf.cm, 0.4 to 17 inch lbs.). The reverse procedure of uninstallation is executed for installation completion.