How to install the rear Sway Bar Kit on 2008 Toyota 4Runner?

You must start by fitting the two sway bar bushes onto the sway bar kit while placing the sway bar bush towards the inside of the sway bar kit stopper. Use 4 bolts to attach the sway bar kit with its 2 sway bar brackets while torquing them to 30 Nm (306 kgf-cm, 22 ft-lbf). Starting with the LH side sway bar link installation use the nut then torque it to 70 Nm (714 kgf-cm, 52 ft-lbf) except in cases where the ball joint rotates with the nut require a 6 mm hexagon wrench to stabilize the stud. The procedure requires attaching the retainers followed by the cushion to the sway bar link while using a wrench to hold the link before installing the nut and link assembly while torquing to 15 Nm (153 kgf-cm, 11 ft-lbf). When removing the rear sway bar link assembly you must use the same methods that were applied for the right-hand side. The last step involves putting on the rear wheel before torquing it to 112 Nm (1,137 kgf-cm, 83 ft-lbf).

OEM 2008 Toyota 4Runner Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Sway Bar Kits found

View related parts
2008 Toyota 4Runner Bar, Stabilizer, Rear
Part Number: 48812-60200
$219.01 MSRP: $312.70
You Save: $93.69 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sway Bar
- Position: Rear
- Replaces: 48812-60190
- Part Name Code: 48812
- Item Weight: 5.20 Pounds
- Item Dimensions: 51.8 x 21.2 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48812-60200
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2008 Toyota 4Runner Bar, Stabilizer, Front
Part Number: 48811-60240
$157.32 MSRP: $222.71
You Save: $65.39 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer; Sway Bar
- Position: Front
- Part Name Code: 48811
- Item Weight: 7.60 Pounds
- Item Dimensions: 44.7 x 12.4 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-60240
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2008 Toyota 4Runner Stabilizer Bar, Front
Part Number: 48811-60230
$157.32 MSRP: $222.71
You Save: $65.39 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar; Bar, Stabilizer, Front
- Position: Front
- Part Name Code: 48811
- Item Weight: 7.50 Pounds
- Item Dimensions: 44.2 x 12.8 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-60230
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS

2008 Toyota 4Runner Sway Bar Kit

Looking for affordable OEM 2008 Toyota 4Runner Sway Bar Kit? Explore our comprehensive catalogue of genuine 2008 Toyota 4Runner Sway Bar Kit. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota 4Runner Parts Questions & Experts Answers

Q: How to install the rear Sway Bar Kit on 2008 Toyota 4Runner?
A: You must start by fitting the two sway bar bushes onto the sway bar kit while placing the sway bar bush towards the inside of the sway bar kit stopper. Use 4 bolts to attach the sway bar kit with its 2 sway bar brackets while torquing them to 30 Nm (306 kgf-cm, 22 ft-lbf). Starting with the LH side sway bar link installation use the nut then torque it to 70 Nm (714 kgf-cm, 52 ft-lbf) except in cases where the ball joint rotates with the nut require a 6 mm hexagon wrench to stabilize the stud. The procedure requires attaching the retainers followed by the cushion to the sway bar link while using a wrench to hold the link before installing the nut and link assembly while torquing to 15 Nm (153 kgf-cm, 11 ft-lbf). When removing the rear sway bar link assembly you must use the same methods that were applied for the right-hand side. The last step involves putting on the rear wheel before torquing it to 112 Nm (1,137 kgf-cm, 83 ft-lbf).