Other Name: Spring, Coil, Front; Coil Spring, Front Right; Coil Springs; Spring; Spring, Front Coil, Passenger Side
Position: Passenger Side
Replaces: 48131-35510
Part Name Code: 48131
Item Weight: 6.80 Pounds
Item Dimensions: 16.1 x 7.0 x 5.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48131-35511
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Toyota 4Runner Submodels:
Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
2008 Toyota 4Runner Coil Springs
Looking for affordable OEM 2008 Toyota 4Runner Coil Springs? Explore our comprehensive catalogue of genuine 2008 Toyota 4Runner Coil Springs. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2008 Toyota 4Runner Coil Springs Parts Questions & Experts Answers
Q: How do you install the rear coil spring and connect the associated components on 2008 Toyota 4Runner?
A: Start rear coil spring installation by putting the coil spring rear LH into the axle housing of the rear while positioning its lower end inside the spring lower seat gap. After installing the shock absorber assembly rear LH bolt you should first temporarily tighten it. Fully tighten the shock absorber assembly rear LH bolt to reach 98 Nm (1,000 kgf-cm, 72 ft-lbf) after stabilizing the suspension. Complete the connection of the rear brake tube flexible hose by installing 2 clips to the 2 flexible hoses and joining brake tubes to the flexible hose using a union nut wrench while tightening the components to 15 Nm (155 kgf-cm, 11 ft-lbf). You must add brake fluid to the reservoir before performing the brake line bleeding and checking the reservoir fluid level and inspecting for leakage of brake fluid. Install the rear wheel by tightening its bolts to 112 Nm (1,137 kgf-cm, 83 ft-lbf).