Other Name: Air Bag Assembly, Instrument Panel; Instrument Panel Air Bag, Upper; Passenger Inflator Module; Air Bag Assembly, Instrument Panel Passenger W/O Door
Position: Upper
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2019-2022 Toyota Avalon | Hybrid Limited, Hybrid XLE, Hybrid XSE, Hybrid XSE Nightshade, Limited, Touring, TRD, XLE, XSE, XSE Nightshade | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
Other Name: Air Bag Assembly, Instrument Panel; Instrument Panel Air Bag, Upper; Passenger Inflator Module; Air Bag Assembly, Instrument Panel Passenger W/O Door
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2003-2004 Toyota Avalon | XL, XLS | 6 Cyl 3.0 L GAS
Other Name: Air Bag Assembly, Instrument Panel; Air Bag Assembly, Instrument Panel Passenger
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
1998-1999 Toyota Avalon | XL, XLS | 6 Cyl 3.0 L GAS
| Page 1 of 3 |Next >
1-20 of 42 Results
Toyota Avalon Air Bag
If you're thinking about purchasing OEM parts for your Toyota Avalon, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Avalon Air Bag at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.
Q: How to Service and Repair the Side Air Bag in a Power Seat on Toyota Avalon?
A: In order to service the power seat side air bag, slide the lock to disconnect the connector. To reconnect, fit the male connector so that it fits the female connector until it clips in and there is no rubbing. Assure safety by drawing a little. Do not touch the slider and change any deformed release board.
Q: What precautions should be taken when scrapping vehicles equipped with an SRS or disposing of the side Air Bag assembly on Toyota Avalon?
A: When scrapping vehicles with an SRS, deploy the Air Bag outdoors using tool 09082-00700, at least 10 m away. After deployment, wait 30 minutes before handling, wearing gloves and safety glasses. Dispose of the deployed assembly in a vinyl bag, following standard disposal procedures. Do not apply water.