Other Name: Air Bag Assembly, Curtain Shield; Curtain Air Bag, Right; Head Air Bag; Air Bag Assembly, Curtain Shield, Passenger Side
Position: Passenger Side
Part Name Code: 62170A
Item Weight: 12.20 Pounds
Item Dimensions: 46.9 x 18.7 x 9.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 62170-AC010
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Toyota Avalon Submodels:
Base, Limited, Touring, XL, XLS | 6 Cyl 3.5 L GAS
2008 Toyota Avalon Air Bag
Looking for affordable OEM 2008 Toyota Avalon Air Bag? Explore our comprehensive catalogue of genuine 2008 Toyota Avalon Air Bag. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2008 Toyota Avalon Parts Questions & Experts Answers
Q: What are the essential precautions and procedures for handling Air Bag systems on 2008 Toyota Avalon?
A: The vehicle contains a Supplemental Restraint System (SRS) which includes seven different Air Bags for driver, front passenger, driver side knee and front seat side as well as curtain shield protection. A procedure of at least ninety seconds wait time must pass after shutting off ignition and removing the negative cable to perform any servicing operation. All SRS components must remain directly out of the path of both fires and hot airflow. You should always check DTCs before taking off the battery because determining malfunction signs requires great effort. Check all SRS parts after accidents regardless of Air Bag deployment and extract the Air Bag sensor before making any repairs when damaging impacts are possible. replacement with new SRS parts is mandatory during repairs because owners should not attempt any component disassembly or repairs on the Steering Pad together with the Front Passenger Air Bag Assembly, Driver Side Knee Air Bag Assembly, Front Seat Side Air Bag Assembly, and Curtain Shield Air Bag Assembly, Center Air Bag Sensor Assembly, Front Air Bag Sensor, Side Air Bag Sensor, Rear Air Bag Sensor, Front Seat Inner Belt Assembly, Seat Position Air Bag Sensor, Occupant Classification ECU, or Front Seat Outer Belt Assembly when signs of defect are observed Electrical circuit troubleshooting requires a high impedance volt/ohmmeter with minimum 10 kOhms/Vrms value to use on SRS components while remaining vigilant about the safety warnings on adjacent information labels. A SRS warning light test should be conducted immediately following your completion of SRS work. Check and note system contents before disconnecting the negative terminal cable because memory clearing will occur. The cable reinstallation requires activating the Air Bag sensor before proceeding to check that all sensors are properly installed prior to connector disconnection or connection. The yellow-colored SRS connectors deliver reliability performance and include protective mechanisms that stop unsuitable connections. The correct procedures must be followed when disconnecting or connecting different SRS elements to check each connection is secure and to detect the audible "click" sounds during the lock process.