How to replace the Camshaft Position Sensor on Toyota Avalon?

The replacement of this sensor begins by opening the V-bank cover with a 5 mm hexagon wrench to undo the cap nuts and loosening the fastener in a counterclockwise direction until the cover can be removed. Proceed to remove the air cleaner hose together with its resonator. Start by removing the two camshaft position sensor connectors before unbolting the 2 camshaft position sensors from their positions while collecting the O-rings off the sensors. To complete the installation you should place fresh O-rings onto the new camshaft position sensors before tightening them with bolts to a torque specification of 8 N.m (80 kgf.cm, 69 in.lbf). Proceed by attaching the 2 camshaft position sensor connectors and reinstalling the air cleaner hose with resonator before installing the V-bank cover by using the 5 mm hexagon wrench to fasten it with 3 cap nuts while pressing down the fastener.

OEM Toyota Avalon Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Camshaft Position Sensors found

View related parts
Toyota Avalon Camshaft Position Sensor, Driver Side
Part Number: 90919-T5005
$102.96 MSRP: $144.53
You Save: $41.57 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Camshaft Position Sensor, Left; Crankshaft Position Sensor; Camshaft Sensor; Cam Sensor; Sensor, Cam Position; Engine Camshaft Position Sensor
- Manufacturer Note: (L)
- Position: Driver Side
- Replaces: 9004A-19003, 90919-05060, 90919-T5002
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2022 Toyota Avalon | Base, Hybrid Limited, Hybrid XLE, Hybrid XLE Plus, Hybrid XLE Premium, Hybrid XLE Touring, Limited, Touring, TRD, XL, XLE, XLE Plus, XLE Premium, XLE Touring, XLE Touring SE, XLS, XSE, XSE Nightshade | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
Toyota Avalon Sensor, Camshaft Position
Part Number: 90080-19014
$69.78 MSRP: $83.30
You Save: $13.52 (17%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Cam Position; Engine Camshaft; Crankshaft; RPM Sensor
- Replaces: 90919-05026
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2004 Toyota Avalon | XL, XLS | 6 Cyl 3.0 L GAS
View related parts
Toyota Avalon Camshaft Position Sensor, Passenger Side
Part Number: 90919-05061
$124.89 MSRP: $176.80
You Save: $51.91 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Camshaft Position Sensor, Right; Crankshaft Position Sensor; Camshaft Sensor; Cam Sensor; Crankshaft Sensor; Sensor, Cam Position; Engine Camshaft Position Sensor
- Manufacturer Note: NO.1
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2022 Toyota Avalon | Limited, Touring, TRD, XLE, XSE, XSE Nightshade | 6 Cyl 3.5 L GAS
View related parts
Toyota Avalon Sensor, Camshaft Position
Part Number: 90919-A5007
$103.20 MSRP: $144.86
You Save: $41.66 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Sensor, Cam Position; Engine Camshaft Position Sensor
- Replaces: 90919-05096
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2022 Toyota Avalon | Hybrid Limited, Hybrid XLE, Hybrid XSE, Hybrid XSE Nightshade, Limited, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Avalon Sensor, Camshaft Position
Part Number: 90919-05013
$148.51 MSRP: $210.23
You Save: $61.72 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Camshaft Position Sensor
- Manufacturer Note: (J)
- Replaces: 90080-19006
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-1999 Toyota Avalon | XL, XLS | 6 Cyl 3.0 L GAS

Toyota Avalon Camshaft Position Sensor

Choose genuine Camshaft Position Sensor that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Camshaft Position Sensor for your Toyota Avalon? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Avalon parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Camshaft Position Sensor of Toyota avalon is an important system which identify the position and speed of camshaft and send that data to the ECM to control fuel injectors and ignition. Generally, the sensor is situated above the camshaft but its position can slightly differ from one model to another. In combination with the crank sensor, the CPS is used to coordinate the motions of many of the engine's internals to achieve the desired timing of fuel injection and the measurement of engine speed. This, therefore, explains why technologists recommend regular checkups and maintenance of the Camshaft Position Sensor in order to avoid the poor performance that emanates from it.

Toyota Avalon Camshaft Position Sensor Parts and Q&A

Sensor, Camshaft Position
90080-19014
Q: How to replace the Camshaft Position Sensor on Toyota Avalon?
A:
The replacement of this sensor begins by opening the V-bank cover with a 5 mm hexagon wrench to undo the cap nuts and loosening the fastener in a counterclockwise direction until the cover can be removed. Proceed to remove the air cleaner hose together with its resonator. Start by removing the two camshaft position sensor connectors before unbolting the 2 camshaft position sensors from their positions while collecting the O-rings off the sensors. To complete the installation you should place fresh O-rings onto the new camshaft position sensors before tightening them with bolts to a torque specification of 8 N.m (80 kgf.cm, 69 in.lbf). Proceed by attaching the 2 camshaft position sensor connectors and reinstalling the air cleaner hose with resonator before installing the V-bank cover by using the 5 mm hexagon wrench to fasten it with 3 cap nuts while pressing down the fastener.