Toyota 73960-07050
Passenger Air Bag

The initial step for repairing or servicing the power seat side air bag requires using a finger to free the lock through slider movement before disconnecting the connector. To connect both parts align the male connector lock with the female connector slider while facing in the same direction shown in the illustration and then join them without causing friction. Users should insert these components until they lock into place before checking their security by light pulling action. A correct fit results in both an audible confirmation and full retraction of the outer parts. Touch the slider when it moves only by keeping your hands away, also pay attention to not bending the release board since using a new board becomes necessary in case of bending.

Avoid touching the slider as it moves, and take care not to deform the release board.

Reinstall the inner front seat cushion shield and front seat cushion shield with their respective screws, followed by the reclining adjuster knobs and headrest.