Other Name: Air Bag Assembly, Curtain Shield; Curtain Air Bag, Right; Head Air Bag; Air Bag Assembly, Curtain Shield, Passenger Side
Position: Passenger Side
Part Name Code: 62170A
Item Weight: 12.20 Pounds
Item Dimensions: 46.9 x 18.7 x 9.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 62170-AC010
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2006 Toyota Avalon Submodels:
Base, Limited, Touring, XL, XLS | 6 Cyl 3.5 L GAS
2006 Toyota Avalon Air Bag
Looking for affordable OEM 2006 Toyota Avalon Air Bag? Explore our comprehensive catalogue of genuine 2006 Toyota Avalon Air Bag. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2006 Toyota Avalon Parts Questions & Experts Answers
Q: What are the steps and precautions to take when working with the Air Bag/Supplemental Restraint System (SRS) after disconnecting the battery on 2006 Toyota Avalon?
A: Beginning work must occur 90 seconds after activating the "LOCK" position with the ignition switch and cable removal from the negative (-) terminal battery connection because SRS possesses a Back Up power supply that can activate the SRS during this period. Work on the audio memory system requires you to disconnect the negative (-) terminal cable yet you need to write down audio memory system content prior to starting your work. Restore the audio systems before the necessary adjustment of the vehicle clock. A properly installed Back Up power supply outside the vehicle will eliminate the system memory functions. The Air Bag sensor needs removal before repairs for cases where potential impacts could occur directly to it and maintenance workers must avoid exposing the steering wheel pad or front passenger Air Bag assembly or Air Bag sensor assembly or front and side sensor assemblies to hot air or direct flames. The Air Bag/Supplemental Restraint System (SRS) contains a Back Up energy reserve that will maintain sufficient deployment voltage for 90 seconds when the ignition switch goes Off while the battery connection has been cut despite the driver turning the battery back on. Record all radio station settings before disconnecting the battery since it will erase all vehicle memory. A proper preparation for service work requires turning the ignition to Lock position followed by battery ground cable removal to wait for at least 90 seconds before starting any diagnostic or maintenance procedures. According to the system arming procedure start with turning the ignition to Lock and then connect the battery ground for at least ten seconds afterwards. Next check the SRS lamp both appears and turns off during a six second interval after setting ignition to ACC or On. A system condition exists if the lamp fails to go off. Special Service Tool: 09843-18000.