Other Name: Lock Assembly, Front Door W; Door Lock Actuator Motor, Front Left; Door Latch Assembly, Front Left; Lock Assembly; Front Door W/Motor, Driver Side; Door Lock Actuator Motor.
Position: Driver Side
Replaces: 69040-06180
Item Weight: 2.10 Pounds
Item Dimensions: 8.5 x 5.7 x 5.7 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 69040-0C050
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Other Name: Lock Assembly, Front Door W; Door Lock Actuator Motor, Front Right; Door Latch Assembly, Front Right; Lock Assembly; Front Door W/Motor, Passenger Side; Door Lock Actuator Motor; Door Latch Assembly.
Manufacturer Note: WIRELESS DOOR LOCK-WITH(PANIC BUTTON)&DOOR OUTSIDE HANDLE-BODY COLOR,W/O(PASSENGER KEY CYLINDER)&POWER WINDOW-WITH(DRIVER ONE TOUCH DOWN)
Position: Passenger Side
Item Weight: 1.50 Pounds
Item Dimensions: 8.0 x 5.6 x 5.7 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 69030-42230
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Other Name: Lock Assembly, Rear Door W; Actuator Motor, Rear Right; Latch Assembly, Center/Rear Right; Lock Assembly; Rear Door W/Motor, Passenger Side; Door Lock Actuator Motor.
Manufacturer Note: POWER WINDOW-WITH(DRIVER ONE TOUCH DOWN)
Position: Passenger Side
Replaces: 69050-42020
Item Weight: 1.60 Pounds
Item Dimensions: 9.1 x 6.0 x 3.6 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 69050-42021
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Scion xD Submodels:
Base | 4 Cyl 1.8 L GAS
2009 Scion xD Door Lock Actuator
Looking for affordable OEM 2009 Scion xD Door Lock Actuator? Explore our comprehensive catalogue of genuine 2009 Scion xD Door Lock Actuator. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Scion xD Door Lock Actuator Parts Q&A
Q: How to remove the rear door lock actuator on 2009 Scion xD?
A: The first step to obtain the rear door lock actuator requires disconnecting the negative battery terminal's cable. The first steps require removal of rear door armrest base upper panel, inside handle bezel, trim board sub-assembly, trim bracket and service hole cover. The rear door Weather Strip needs separation before extracting the rear door belt moulding assembly as well as the glass run and window division bar sub-assembly and quarter window Weather Strip and glass sub-assembly. You should proceed by removing the rear door window regulator sub-assembly from the system. The rear door lock requires "TORX" socket wrench T30 to take out three screws before pulling the release plate out through the rear door outside handle frame by lowering the door lock. The protective tape must be wrapped on a screwdriver for opening the rear door lock's sealing mechanism. Unseal the door lock wire harness from the rear door lock before undoing its claw with this tool. Deliver the rear door lock remote control cable while using a screwdriver examined with protective tape to disengage the 3 claws and open the cover for removing the rear door inside locking cable.