My Garage
Cart
Make sure this part fits

Toyota 69060-42021
Lock Actuator, Driver Side

2006-2019 Toyota 6906042021

Customer Questions & Expert Answers (14)
Toyota 69060-42021 Lock Actuator, Driver Side
  • Part Description
    Lock Assembly, Rear Door W; Actuator Motor, Rear Left; Latch Assembly, Center/Rear Left
  • Position
    Driver Side
  • Replaces
    69060-42020
  • Manufacturer
    Toyota
Make sure this part fits
$208.41 MSRP: $297.55
You Save: $89.14 (30%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2016 Scion iMBase4 Cyl 1.8 L GAS
    2008-2014 Scion xDBase4 Cyl 1.8 L GAS
    2009-2013 Toyota CorollaBase, L, LE, S, XLE, XRS4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
    2017-2018 Toyota Corolla iMBase4 Cyl 1.8 L GAS
    2012-2019 Toyota Prius CFour, L, LE, One, Persona Series, Three, Two4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)
    2006-2018 Toyota RAV4Adventure, Base, Hybrid Limited, Hybrid SE, Hybrid XLE, LE, Limited, Platinum, SE, Sport, XLE4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 69060-42021 a good match for my car? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 69060-42021 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    What should be applied to the sliding and rotating areas of the front door lock for the 2009 Scion xD? Posted by Customer
    A:
    Apply MP grease.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock
    Q:
    What should be removed after the glass and regulator components for the 2008 Scion xD? Posted by Customer
    A:
    Remove the front door frame rear lower sub-assembly and the front door outside handle cover.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step to install the rear door lock for the 2009 Scion xD? Posted by Customer
    A:
    If reusing a previously removed door lock, replace the packing in the connecting part with new packing and ensure no grease or dirt is on the packing surface.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock
    Q:
    What type of adhesive should be applied to the screws for the 2008 Scion xD? Posted by Customer
    A:
    Apply adhesive to the threads of the screws using Toyota Genuine Adhesive 1324, Three Bond 1324, or an equivalent.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock
    Q:
    What is the final step in the process for the 2009 Scion xD? Posted by Customer
    A:
    Using a screwdriver with its tip wrapped in protective tape, disengage the 3 claws and open the cover, then remove the front door inside locking cable.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the next step after removing the glass components for the 2010 Scion xD? Posted by Customer
    A:
    Take out the rear door window regulator sub-assembly.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be applied to the sliding and rotating areas of the front door lock for the 2010 Scion xD? Posted by Customer
    A:
    Apply MP grease.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock
    Q:
    What is the next step after removing the glass components for the 2009 Scion xD? Posted by Customer
    A:
    Take out the rear door window regulator sub-assembly.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done if reusing the front door lock assembly with the power door lock for the 2009 Toyota Corolla? Posted by Customer
    A:
    Replace the door lock wiring harness seal with a new one, avoiding grease or dust on the seal surface to prevent water intrusion and potential malfunction. Then, apply MP grease, insert the front door lock open rod, ensure a secure connection, and install the assembly with the same torque specifications.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock
    Q:
    What is the first step to install the rear door lock components for the 2009 Toyota Corolla? Posted by Customer
    A:
    Begin by installing the rear door inside locking cable assembly for both configurations, with or without the power door lock, ensuring to engage the 3 claws if applicable.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock
    Q:
    What is the next step after opening the cover for the 2008 Scion xD? Posted by Customer
    A:
    Remove the rear door lock remote control cable.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    How do you remove the rear door inside locking cable assembly if there is no power door lock for the 2009 Toyota Corolla? Posted by Customer
    A:
    Remove the assembly.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be removed after the front door window regulator handle assembly for the 2009 Toyota Corolla? Posted by Customer
    A:
    Remove the front door inside handle bezel.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock Actuator
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota Lock Actuator, Driver Side 69060-42021 Designed for Proper Fit and Performance

OEM Toyota part with Part Number 69060-42021 Lock Actuator, Driver Side known as Toyota Door Lock, Door Lock Actuator, Door Latch Assembly component provides maximum durability and optimal performance. The certified Toyota dealership components feature a warranty protection for 12-month, 12,000-mile usage. The use of OEM part 69060-42021 Lock Actuator, Driver Side enables maintenance standards that match the original factory installation quality. The specific item serves the following model series: 2009-2013 Toyota Corolla and 2006-2018 Toyota RAV4 and 2012-2019 Toyota Prius C as well as 2017-2018 Toyota Corolla iM.
Genuine Toyota offers this high-quality Lock Assembly, Rear Door W; Actuator Motor, Rear Left; Latch Assembly, Center/Rear Left under manufacturer part number 69060-42021 for use in the Driver Side. This component features dimensions of 7.7 x 5.5 x 5.6 inches and weighs 1.40 Pounds. This component 6906042021 is specially constructed for vehicle fitting requirements within the Direct Replacement classification. This product is also known as Lock Assembly; Rear Door W/Motor, Driver Side; Door Lock Actuator Motor. replace 69060-42020. Each vehicle requires the component which has an identified SKU of 69060-42021. Additional notes include POWER WINDOW-WITH(DRIVER ONE TOUCH DOWN). The factory-warranty from Toyota guarantees continuous reliable operation and high performance for this part 69060-42021. The Shipping Policy and Return Policy pages provide full details about shipping procedures and return instructions.
OEM parts have no match as far as quality is concerned. They are thoroughly quality controlled and are made to Toyota factory specifications. All these eliminate the faults and flaws. And that is why you can be worry-free because they guarantee an outstanding lifespan and perfect matching. We offer very many different OEM components at competitive prices at ToyotaPartsNow.com. We offer an entire product line of all authentic Toyota products, with a manufacturer warranty as an assurance. Customer satisfaction is also part of our priorities and we offer no-hassles returns and fast shipping of all our components.