My Garage
Cart
Make sure this part fits

Toyota 69050-42021
Lock Actuator, Passenger Side

2006-2019 Toyota 6905042021

Customer Questions & Expert Answers (14)
Toyota 69050-42021 Lock Actuator, Passenger Side
  • Part Description
    Lock Assembly, Rear Door W; Actuator Motor, Rear Right; Latch Assembly, Center/Rear Right
  • Position
    Passenger Side
  • Replaces
    69050-42020
  • Manufacturer
    Toyota
Make sure this part fits
$208.41 MSRP: $297.55
You Save: $89.14 (30%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Toyota
    Manufacturer Part Number69050-42021
    Part DescriptionLock Assembly, Rear Door W; Actuator Motor, Rear Right; Latch Assembly, Center/Rear Right
    Other NamesLock Assembly; Rear Door W/Motor, Passenger Side; Door Lock Actuator Motor.
    Manufacturer NotePOWER WINDOW-WITH(DRIVER ONE TOUCH DOWN)
    Item Dimensions9.1 x 6.0 x 3.6 inches
    Item Weight1.60 Pounds
    PositionPassenger Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces69050-42020
    ManufacturerToyota
    SKU69050-42021
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2016 Scion iMBase4 Cyl 1.8 L GAS
    2008-2014 Scion xDBase4 Cyl 1.8 L GAS
    2009-2013 Toyota CorollaBase, L, LE, S, XLE, XRS4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
    2017-2018 Toyota Corolla iMBase4 Cyl 1.8 L GAS
    2012-2019 Toyota Prius CFour, L, LE, One, Persona Series, Three, Two4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)
    2006-2018 Toyota RAV4Adventure, Base, Hybrid Limited, Hybrid SE, Hybrid XLE, LE, Limited, Platinum, SE, Sport, XLE4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is 69050-42021 a good match for my car? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 69050-42021 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    What is the next step after applying grease for the 2009 Scion xD? Posted by Customer
    A:
    Install the front door inside locking cable, engage the 3 claws, and close the cover.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock
    Q:
    What are the next steps after removing the front door lock for the 2009 Scion xD? Posted by Customer
    A:
    Remove the front door lock open rod from the front door lock, take off the door lock wire harness seal from the front door lock, and remove the front door lock remote control cable.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the next step after applying grease for the 2010 Scion xD? Posted by Customer
    A:
    Install the rear door inside locking cable, engage the 3 claws, and close the cover.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock
    Q:
    What should be done after removing the release plate for the 2008 Scion xD? Posted by Customer
    A:
    Remove the door lock wire harness seal.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done with the door lock wire harness seal for the 2010 Scion xD? Posted by Customer
    A:
    Remove the door lock wire harness seal from the rear door lock.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be connected after installing the rear door lock for the 2008 Scion xD? Posted by Customer
    A:
    Connect the connector.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock
    Q:
    What additional parts must be taken off next for the 2008 Scion xD? Posted by Customer
    A:
    Take off the outer rear view mirror assembly, front door belt moulding assembly, front door trim bracket, front door service hole cover, front door glass sub-assembly, front door glass run, and front door window regulator sub-assembly.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the final step in the installation process for the 2009 Scion xD? Posted by Customer
    A:
    Connect the cable to the negative battery terminal, torquing it to 5.4 Nm (55 kgf-cm, 48 in-lbf).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock
    Q:
    What should be done with the door lock wire harness seal for the 2009 Scion xD? Posted by Customer
    A:
    Remove the door lock wire harness seal from the rear door lock.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be removed after the service hole cover for the 2009 Toyota Corolla? Posted by Customer
    A:
    Take out the front door glass sub-assembly, the front door No. 2 stiffener cushion, and the front door glass run.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What components should be installed after the front door lock assembly for the 2009 Toyota Corolla? Posted by Customer
    A:
    Install the front door outside handle cover, rear lower frame sub-assembly, glass run, No. 2 stiffener cushion, glass sub-assembly, service hole cover, trim bracket, inner glass weatherstrip, inside handle sub-assembly, trim board sub-assembly, and the front armrest upper base panel for both configurations.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock
    Q:
    What should be done for the rear door lock assembly without the power door lock for the 2009 Toyota Corolla? Posted by Customer
    A:
    Apply MP grease to the sliding parts, insert the assembly into the rear door outside handle release plate, and secure it to the rear door panel, ensuring a solid connection with the release plate before using a "TORX" socket wrench (T30) to install the assembly with 3 screws, torqued to 5.0 Nm (51 kgf-cm, 44 in-lbf).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock
    Q:
    What should be removed after the rear door window regulator handle assembly for the 2009 Toyota Corolla? Posted by Customer
    A:
    Remove the rear door inside handle bezel.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock Actuator
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 69050-42021, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 69050-42021 Lock Actuator, Passenger Side. It is sometimes referred to as Toyota Door Lock, Toyota Door Lock Actuator, Toyota Rear Passenger Door Handle Latch, Toyota Door Latch Assembly. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 6905042021 Lock Actuator, Passenger Side. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery