Other Name: Blade, Rear Wiper; Back Glass Wiper Blade; Rear Blade
Position: Rear
Fits the following Toyota Models:
Highlander | 2014-2019 | Hybrid LE, Hybrid Limited, Hybrid Limited Platinum, Hybrid XLE, LE, LE Plus, Limited, Limited Platinum, SE, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
Sienna | 2021-2023 | 25th Anniversary Edition, LE, Limited, Platinum, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
Other Name: Blade, Front Wiper, Right-Hand; Windshield Wiper Blade, Right; Front Blade; Blade, Front Wiper, Passenger Side
Position: Passenger Side
Fits the following Toyota Models:
Corolla | 2014-2019 | 50th Anniversary Special Edition, L, LE, LE Eco, Le Eco Plus, S, SE, Special Edition, XLE, XSE | 4 Cyl 1.8 L GAS
RAV4 | 2013-2018 | Adventure, Hybrid Limited, Hybrid SE, Hybrid XLE, LE, Limited, Platinum, SE, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS
Other Name: Blade, Front Wiper, Left-Hand; Windshield Wiper Blade, Left; Front Blade; Blade, Front Wiper, Driver Side
Position: Driver Side
Fits the following Toyota Models:
Highlander | 2014-2019 | Hybrid LE, Hybrid Limited, Hybrid Limited Platinum, Hybrid XLE, LE, LE Plus, Limited, Limited Platinum, SE, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
Q: How to service and repair the front wiper blade on Toyota Camry?
A: Service and repair of the front wiper blade begins by undoing its holder while removing the blade from the wiper arm while protecting the windshield from bending damage. The wiper rubber together with its backing plates needs removal from the front blade before disconnecting both backing plates from the rubber. Install the wiper rubber backing plates on the wiper rubber by positioning the rubber protrusions through the backing plate notches and verify that both structures follow the glass curve. Position the wiper rubber onto the front wiper blade by fitting it with its curved end pointing directly at the wiper arm while continuously pushing it forward for complete installation security. Reattach the front wiper blade together with its holder as the final step.
Q: How to replace the front Wiper Blade on Toyota 4Runner?
A: First remove the wiper blade LH from the front wiper arm LH while keeping the front wiper arm from being folded. Detach the front wiper rubber LH from the front wiper blade followed by the removal of its 2 wiper rubber backing plates. The wiper rubber backing plates should be fastened onto the wiper rubber LH using the specified direction of curvature for appropriate replacement. Fit the wiper rubber LH facing the arm axis side while its head section (larger side) positioned toward you. After that feed the front wiper blade into wiper rubber grooves until total connection is reached.
Q: How to replace the Wiper Blade LH on Toyota Tacoma?
A: Start by raising the front wiper blade until it reaches the appropriate position before removing the front wiper blade LH from the front wiper arm LH while carefully avoiding damage to the windshield surface with the front wiper arm. Besides the wiper rubber LH, you must remove its front wiper rubber from the front wiper blade followed by the removal of both wiper rubber backing plates from the wiper rubber LH. Fit the 2 wiper rubber backing plates onto the wiper rubber LH by following orientation standards before you can install the wiper rubber LH which needs to face the arm axle side with large head orientation while you push the front wiper blade into the wiper rubber grooves. The final step to install the front wiper blade LH on the front wiper arm LH requires the claw to secure the blade while possibly needing additional holding pressure.