Other Name: Switch, Seat Heater; Seat Heater Switch; Power Seat Switch; Switch
Fits the following Toyota Models:
Highlander | 2014-2019 | Hybrid LE, Hybrid Limited, Hybrid Limited Platinum, Hybrid XLE, LE, LE Plus, Limited, Limited Platinum, SE, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
Other Name: Switch, Seat Heater; Seat Heater Switch; Power Seat Switch; Switch
Position: Driver Side
Fits the following Toyota Models:
Corolla | 2020-2022 | Hybrid LE, L, LE, SE, SE Apex, SE Nightshade, XLE, XSE, XSE Apex | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
Other Name: Switch, Seat Heater; Seat Heater Switch, Left, Rear Left; Power Seat Switch; Switch; Seat Heater Switch
Position: Driver Side
Replaces: 84751-42081, 84751-42080
Fits the following Toyota Models:
Mirai | 2016-2020 | Base | FUEL CELL EV (FCEV)
RAV4 | 2013-2018 | Adventure, Hybrid Limited, Hybrid SE, Hybrid XLE, LE, Limited, Platinum, SE, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS
Other Name: Switch, Seat Heater; Seat Heater Switch, Center Left; Power Seat Switch; Switch; Seat Heater Switch
Position: Center
Fits the following Toyota Models:
Corolla | 2020-2022 | Hybrid LE, L, LE, SE, SE Apex, SE Nightshade, XLE, XSE, XSE Apex | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
Camry | 2012-2014 | Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, SE Sport, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
Q: How to install the seat heater switch and related components on Toyota Camry?
A: Begin by securing the seat heater switch with the 2 claws. Then, install the floor shift position indicator housing sub-assembly, followed by the No. 2 and No. 1 instrument cluster finish panel garnishes. Conclude the installation by adding the shift lever knob sub-assembly.
Q: How to install the Seat Heater Switch on Toyota RAV4?
A: Installation of Seat Heater Switch, one will need to attach the switch to the two claws. Then, install the switch base. Finally, attach the cable to a negative battery terminal.