Other Name: Blade, Front Wiper, Right-Hand; Windshield Wiper Blade, Right; Windshield Wiper Blade, Left; Back Glass Wiper Blade; Rear Blade; Blade Assembly; Front Blade; Blade, Front Wiper, Passenger Side; Blade, Front Wiper, Driver Side
Position: Front Passenger Side
Replaces: 85212-13030, 85212-44030
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2005-2010 Toyota Sienna | CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2011-2023 Toyota Sienna | 25th Anniversary Edition, Base, L, LE, Limited, Limited Premium, Platinum, SE, SE Premium, XLE, XLE Premium, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
1998-2003 Toyota Sienna | CE, LE, XLE | 6 Cyl 3.0 L GAS
| Page 1 of 2 |Next >
1-20 of 28 Results
Toyota Sienna Wiper Blade
If you're thinking about purchasing OEM parts for your Toyota Sienna, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Sienna Wiper Blade at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.
Q: How to replace the rear Wiper Blade on Toyota Sienna?
A: To change the rear wiper rubber, just get the wiper blade assembly off by unattaching the claw. Straight out With no folding of the arm draw the blade out. Care must be observed when removing the rubber, not to overstretch it, or it will tear, but rather, place the backing plates on the new rubber with the correct orientation.
Q: How to service the rear wiper blade on Toyota Sienna?
A: In order to service the rear wiper blade, remove the assembly by removing the head cap and bringing the blade to the click point. Do not fold but pull the blade straight out. Carefully remove the rubber out of the blade stopper, and then place the backing plates to the new rubber in the proper direction.