Toyota 85214-24051
Wiper Blade Refill, Rubber

The first step for rear wiper rubber replacement begins by manually lifting the back wiper blade to disengage its claw mechanism until it produces a clicking noise while being cautious about damaging the claw mechanism. To replace the rearc wiper blade you should pull it directly from the wiper arm towards the left side of the vehicle while maintaining the rear wiper arm unbent. Grasp the rubber at its protruding end from the blade stopper with care to prevent damage of both backing plates and claw while pushing the blade toward its center for improved accessibility. Place the wiper rubber backing plates onto the rear wiper rubber with proper orientation before completion. The rear wiper rubber should be inserted from the claw side at the middle of the rear wiper blade and subsequently passed through both the rear end side claw while extending beyond the rear end stopper as it moves forward through the front tip side claw.

Next, take off the front wiper rubber LH from the front wiper blade and remove the 2 wiper rubber backing plates from the wiper rubber LH.

Pull the rear wiper blade straight to the vehicle's left from the wiper arm without folding the arm.

Push the front wiper blade into the grooves of the wiper rubber to ensure a complete engagement.

First, raise the rear wiper blade until the claw disengages with a click sound, taking care not to break the claw.

Place the rear wiper so that the rear end of the rubber protrudes from the blade stopper.

Detach the wiper rubber LH from the wiper blade and remove the 2 wiper rubber backing plates from the wiper rubber.

Push the front wiper blade into the grooves of the wiper rubber to ensure complete engagement.

Push the front wiper blade into the grooves of the wiper rubber to ensure complete engagement.

Avoid forcibly pulling out the wiper rubber to prevent deformation of the backing plates or damage to the blade claw.

Attach the 2 wiper rubber backing plates to the wiper rubber LH, making sure to observe and maintain the direction of curvature for proper replacement.

First, remove the FR wiper blade LH from the front wiper arm LH, ensuring not to fold down the front wiper arm during this process.

Next, take off the wiper rubber LH from the FR wiper blade LH and remove the 2 wiper rubber backing plates from the wiper rubber LH.

Remove the rear wiper rubber backing plate No.1 followed by the rear wiper rubber backing plate No.2.

First, remove the front wiper blade LH from the front wiper arm LH, ensuring not to fold down the front wiper arm during this process.

Pull the end of the rubber protruding from the blade stopper, ensuring not to pull it out forcibly to avoid deforming the backing plates or damaging the blade claw; pushing near the middle of the blade can help raise the rubber for easier removal.

Attach the 2 wiper rubber backing plates to the wiper rubber LH, paying attention to the correct orientation of the backing plates.