Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
1985-1992 Toyota 4Runner | DLX, SR5 | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
| Page 1 of 2 |Next >
1-20 of 24 Results
Toyota 4Runner Wiper Blade
If you're thinking about purchasing OEM parts for your Toyota 4Runner, our website is your one-stop destination. We stock an extensive selection of genuine Toyota 4Runner Wiper Blade at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.
Q: How to replace the front Wiper Blade on Toyota 4Runner?
A: To replace the front wiper rubber, remove the front wiper blade LH without folding the arm. Take off the wiper rubber LH and its backing plates. Attach the backing plates to the new wiper rubber, ensuring correct curvature, then install it with the head part facing the arm axis and engage the blade.
Q: How to replace the rear Wiper Blade on Toyota 4Runner?
A: In order to change the back wipers rubber, pull the blade up until the claw is released and then pull the blade to the left without bending the arm. Make sure that the rubber sticks out on the stopper. On either end loop the rubber around the support plates, then place it in the claw and through the stoppers.