Toyota 85212-53061
Blade, Front Wiper, Passenger Side

First remove the wiper blade LH from the front wiper arm LH while keeping the front wiper arm from being folded. Detach the front wiper rubber LH from the front wiper blade followed by the removal of its 2 wiper rubber backing plates. The wiper rubber backing plates should be fastened onto the wiper rubber LH using the specified direction of curvature for appropriate replacement. Fit the wiper rubber LH facing the arm axis side while its head section (larger side) positioned toward you. After that feed the front wiper blade into wiper rubber grooves until total connection is reached.

Begin the front wiper rubber replacement by taking off the front wiper blade LH from the front wiper arm LH yet avoid folding the front wiper arm while performing this step. The next step entails removing the front wiper rubber LH from the wiper blade before removing both wiper rubber backing plates which belong to the wiper rubber LH. Install the wiper rubber backing plates onto the wiper rubber LH while keeping a close eye on its curvature direction. Place the wiper rubber LH on its front wiper blade by orienting its head section toward the arm axis while pushing the blade until it engages with all wiper rubber grooves properly.

Attach the 2 wiper rubber backing plates to the rear wiper rubber, ensuring the direction of curvature is correct.

Next, take off the front wiper rubber from the blade and detach the 2 wiper rubber backing plates from the rubber.

First, raise the rear wiper blade until the claw disengages with a click sound, taking care not to break the claw.

Pushing near the middle of the blade can help raise the rubber for easier removal.

Avoid forcibly pulling out the wiper rubber to prevent deformation of the backing plates or damage to the blade claw.