Toyota 85212-04012
Wiper Blade, Front Passenger Side

Service of the rear wiper blade begins by removing its assembly through cap rotation followed by arm and blade lift. Use a firm pulling motion to lift the wiper blade till the detachable claw emits an audible click before pulling the wiper blade directly to the left toward the vehicle's removal area. Folding the wiper arm without installed blade will protect the back door glass surface from harm. Begin the rear wiper rubber removal by gently pulling the exposed end from the blade stopper without using excessive force to protect the backing plates and blade claws, push the rubber between both ends if needed to simplify its removal. The first step in installation requires you to add the No. 1 and No. 2 backing plates which must be oriented correctly. To install the wiper rubber proceed by feeding it through the second blade claw starting from the front end all the way to the rear end stopper where it will protrude before slipping it through the front end claw. The rear wiper blade assembly requires insertion with push application toward the right vehicle side to connect to the wiper arm followed by lowering the arm and blade before cap installation.

Avoid folding the wiper arm to prevent damage to the windshield surface.