Other Name: Blade, Front Wiper, Right-Hand; Windshield Wiper Blade, Center, Right; Front Blade; Blade, Front Wiper, Passenger Side; Blade, Fr Wiper, Center
Position: Front Passenger Side
Replaces: 85212-35090
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2007-2014 Toyota FJ Cruiser | Base, Trail Teams Special Edition, TRD Special Edition | 6 Cyl 4.0 L GAS
Other Name: Blade, Front Wiper, Right-Hand; Windshield Wiper Blade, Right; Windshield Wiper Blade, Left; Back Glass Wiper Blade; Rear Blade; Blade Assembly; Front Blade; Blade, Front Wiper, Passenger Side; Blade, Front Wiper, Driver Side
Position: Front Passenger Side
Replaces: 85212-13030, 85212-44030
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2007-2014 Toyota FJ Cruiser | Base, Trail Teams Special Edition, TRD Special Edition | 6 Cyl 4.0 L GAS
Other Name: Rubber, Wiper Insert; Wiper Blade; Rubber, Rear Wiper
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2007-2014 Toyota FJ Cruiser | Base, Trail Teams Special Edition, TRD Special Edition | 6 Cyl 4.0 L GAS
Toyota FJ Cruiser Wiper Blade
If you're thinking about purchasing OEM parts for your Toyota FJ Cruiser, our website is your one-stop destination. We stock an extensive selection of genuine Toyota FJ Cruiser Wiper Blade at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.
Q: How to service the rear Wiper Blade on Toyota FJ Cruiser?
A: The rear wiper rubber can be serviced by taking the wiper blade assembly out of the car cautiously. Clean off the rubber and backing plates of the wipers. To install, put the backing plates on the rubber, make sure that they are oriented correctly and then keep the rubber sticking to the blade and reconnect the assembly.
Q: How to remove the front wiper blade and rubber on Toyota FJ Cruiser?
A: To remove the front wiper blade, disengage the claw without folding the wiper arm to avoid damaging the windshield. Then, take off the front wiper rubber and the two backing plates. Repeat the same procedure for both the RH and LH sides.