How to replace the Liftgate Lift Support on the left-hand side on Toyota 4Runner?

First prepare the LH side by removing the 2 bolts and the damper stay which are attached to the door panel while holding the hood with care to detach the hood support. Detaching the damper stay from the vehicle body requires first loosening the bolt then removing the stay from its position. When installing the damper stay use three bolts with torque specifications of 19.5 N.m for the door while the body requires 17.5 N.m torque. Installation procedures for the RH side follow the same method.

How to Properly Install Liftgate Lift Support on Toyota Highlander?

The back window stay assembly should first require a proper rear wiper motor assembly installation using a centering jig to preserve the correct wipe angle. To replace the back window stay bolt you should clean the threaded body surface with a non-residue solvent followed by bolt installation with a torque force of 22 Nm (224 kgf-cm, 16 ft-lbf). The threads of reusable bolts require Toyota Genuine Adhesive 1324 or Three Bond 1324 or another equivalent before installation. It is essential to avoid handling the piston rod during back window stay assembly installation and to forego wearing cotton gloves. The installation starts with attaching the two stop rings to the assembly while double-checking the hood support assembly is properly placed within the ball joint. Start by removing the back window upper trim panel assembly followed by easing out the back door trim cover LH (without power back door) then the back door service hole cover LH (with power back door), the power back door rod detachment (with power back door) and continue by taking out both the back door trim cover RH, back door lock cover (for glass hatch type), assist strap hole cover, assist strap assembly, and back door trim panel assembly. The following components need removal for the task: rear wiper shaft cover alongside rear wiper arm head cap and rear wiper arm and blade assembly, then the rear wiper link cap, wiper link pivot and motor assembly (for glass hatch type). Put the rear wiper motor assembly together with the rear wiper link pivot and rear wiper link cap before adding the rear wiper arm and blade assembly and rear wiper arm head cap and rear wiper shaft cover in the end. Close the process by following these steps: Advance by putting in the back door trim panel assembly then the assist strap assembly, assist strap hole cover, back door lock cover (when utilizing glass hatch type), back door trim cover LH (both with and without power back door), connect the power back door rod (if using power back door), fix the back door service hole cover LH (additionally for power back door), back door trim cover RH and back window upper trim panel assembly.

OEM Toyota Liftgate Lift Support

Back Door Stay

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

378 Liftgate Lift Supports found

View related parts
Toyota Lift Cylinder
Part Number: 68905-AE022
$56.03 MSRP: $78.00
You Save: $21.97 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay Sub-Assembly, Back; Hatch/Glass/Liftgate/Tailgate/Door Lift Support; Support Cylinder; Stay Sub-Assembly, Back Door, Passenger Side; Stay Sub-Assembly, Back Door, Driver Side; Lift Support
- Replaces: 68905-AE020
Fits the following Toyota Models:
- Sienna | 2004-2010 | CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Lift Cylinder, Passenger Side
Part Number: 68930-48012
$34.64 MSRP: $48.22
You Save: $13.58 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay Assembly, Back Window; Back Glass Lift Support, Right; Liftgate Lift Support; Door Lift Support; Glass Support; Stay Assembly, Back Window, Passenger Side; Back Glass Lift Support; Lift Support
- Manufacturer Note: BACK GLASS-WITH(GLASS HATCH-BACK DOOR)
- Position: Passenger Side
- Replaces: 68930-48010, 68930-48011, 68930-0E020
Fits the following Toyota Models:
- Highlander | 2008-2013 | Base, Hybrid, Hybrid Limited, Limited, Plus, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
Toyota Lift Cylinder, Driver Side
Part Number: 68960-80063
$52.21 MSRP: $72.67
You Save: $20.46 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay Assembly, Back Door; Hatch Lift Support, Left; Back Glass; Liftgate; Tailgate; Door; Gas Spring Rear; Support Cylinder; Stay Assembly, Back Door, Driver Side; Lift Support
- Manufacturer Note: W(REAR WIPER & REAR SPOILER)
- Position: Driver Side
- Replaces: 68960-80050
Fits the following Toyota Models:
- Celica | 2000-2005 | GT, GTS | 4 Cyl 1.8 L GAS
View related parts
Toyota Lift Cylinder, Passenger Side
Part Number: 68950-69205
$41.45 MSRP: $57.70
You Save: $16.25 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Stay Assembly, Back Door; Hatch, Right; Back Glass; Liftgate; Tailgate; Door Support; Support Cylinder; Stay Assembly, Back Door, Passenger Side; Lift Support
- Manufacturer Note: REAR SPOILER-WITH
- Position: Passenger Side
Fits the following Toyota Models:
- Land Cruiser | 2013-2015, 2010-2011 | Base | 8 Cyl 5.7 L GAS
View related parts
Toyota Lift Cylinder, Driver Side
Part Number: 68960-49025
$47.19 MSRP: $65.68
You Save: $18.49 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay Assembly, Back Door; Hatch Lift Support, Left; Back Glass Lift Support; Liftgate Lift Support; Door Lift Support; Stay Assembly, Back Door, Driver Side; Lift Support
- Position: Driver Side
Fits the following Toyota Models:
- Highlander | 2001-2003 | Base, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota Lift Cylinder, Driver Side
Part Number: 68960-80061
$50.54 MSRP: $70.34
You Save: $19.80 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay Assembly, Back Door; Hatch Lift Support, Left; Back Glass; Liftgate; Tailgate; Door; Gas Spring Rear; Support Cylinder; Stay Assembly, Back Door, Driver Side; Lift Support
- Manufacturer Note: W(REAR WIPER)
- Position: Driver Side
- Replaces: 68960-80030
Fits the following Toyota Models:
- Celica | 2000-2005 | GT, GTS | 4 Cyl 1.8 L GAS
View related parts
Toyota Lift Cylinder, Driver Side
Part Number: 68940-02022
$37.15 MSRP: $51.72
You Save: $14.57 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay Assembly, Back Window; Back Glass Lift Support, Left; Liftgate Lift Support; Door Lift Support; Stay Assembly, Back Window, Driver Side; Back Glass Lift Support; Lift Support
- Position: Driver Side
- Replaces: 68940-02021
Fits the following Toyota Models:
- Matrix | 2003-2008 | Base, XR, XRS | 4 Cyl 1.8 L GAS
View related parts
Toyota Stay
Part Number: 68950-69045
$43.13 MSRP: $60.03
You Save: $16.90 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay Assembly, Back Door; Liftgate Lift Support; Door Lift Support; Lift Support; Stay Assembly, Back Door, Passenger Side; Stay Assembly, Back Door, Driver Side
Fits the following Toyota Models:
- Land Cruiser | 1988-1990 | Base | 6 Cyl 4.0 L GAS
View related parts
Toyota Lift Cylinder, Passenger Side
Part Number: 68950-80106
$47.67 MSRP: $66.35
You Save: $18.68 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay Assembly, Back Door; Hatch Lift Support, Right; Back Glass; Liftgate; Tailgate; Door; Gas Spring Rear; Support Cylinder; Stay Assembly, Back Door, Passenger Side; Lift Support
- Manufacturer Note: W(REAR WIPER)
- Position: Passenger Side
- Replaces: 68950-80070
Fits the following Toyota Models:
- Celica | 2000-2005 | GT, GTS | 4 Cyl 1.8 L GAS
View related parts
Toyota Lift Cylinder, Driver Side
Part Number: 68960-49385
$44.92 MSRP: $62.53
You Save: $17.61 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay Assembly, Back Door; Back Glass Lift Support; Liftgate Lift Support; Door Lift Support; Lift Support
- Position: Driver Side
Fits the following Toyota Models:
- Highlander | 2008-2009 | Base, Hybrid, Hybrid Limited, Limited, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
Toyota Lift Cylinder, Passenger Side
Part Number: 68950-0E091
$46.83 MSRP: $65.18
You Save: $18.35 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay Assembly, Back Door; Hatch Lift Support, Right; Back Glass Lift Support; Liftgate Lift Support; Door Lift Support; Stay Assembly, Back Door, Passenger Side; Lift Support
- Position: Passenger Side
- Replaces: 68950-0E090
Fits the following Toyota Models:
- Highlander | 2010-2013 | Base, Limited, Plus, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Lift Cylinder, Passenger Side
Part Number: 68930-02010
$31.83 MSRP: $44.31
You Save: $12.48 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay Assembly, Back Window; Back Glass Lift Support, Right; Liftgate Lift Support; Stay Assembly, Back Window, Passenger Side; Back Glass Lift Support; Lift Support
- Manufacturer Note: W(REAR WIPER)
- Position: Passenger Side
Fits the following Toyota Models:
- Matrix | 2003-2004 | Base, XR, XRS | 4 Cyl 1.8 L GAS
View related parts
Toyota Lift Cylinder, Passenger Side
Part Number: 68950-0WE11
$32.37 MSRP: $45.06
You Save: $12.69 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay Assembly, Back Door; Hatch Lift Support, Right; Back Glass Lift Support; Liftgate Lift Support; Door Lift Support; Support Strut; Stay Assembly, Back Door, Passenger Side; Lift Support
- Manufacturer Note: TAILGATE DOOR EASY CLOSER-WITH
- Position: Passenger Side
Fits the following Toyota Models:
- Land Cruiser | 2018-2021 | Base, Heritage Edition | 8 Cyl 5.7 L GAS
View related parts
Toyota Lift Cylinder, Driver Side
Part Number: 68960-0E091
$46.83 MSRP: $65.18
You Save: $18.35 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay Assembly, Back Door; Hatch Lift Support, Left; Back Glass Lift Support; Liftgate Lift Support; Door Lift Support; Stay Assembly, Back Door, Driver Side; Lift Support
- Position: Driver Side
- Replaces: 68960-0E090
Fits the following Toyota Models:
- Highlander | 2013 | Base, Limited, Plus, SE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Lift Cylinder, Driver Side
Part Number: 68960-49345
$42.41 MSRP: $59.04
You Save: $16.63 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay Assembly, Back Door; Hatch, Back Glass, Liftgate, Door Lift Support; Left, Right; Stay Assembly, Back Door, Driver Side; Lift Support
- Position: Driver Side
Fits the following Toyota Models:
- Highlander | 2011-2013 | Hybrid, Hybrid Limited | 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Lift Cylinder, Passenger Side
Part Number: 68950-49365
$42.53 MSRP: $59.20
You Save: $16.67 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay Assembly, Back Door; Hatch Lift Support, Right; Back Glass Lift Support; Liftgate Lift Support; Door Lift Support; Stay Assembly, Back Door, Passenger Side; Lift Support
- Position: Passenger Side
- Replaces: 68950-49257
Fits the following Toyota Models:
- Highlander | 2009-2013 | Base, Hybrid, Hybrid Limited, Limited, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
Toyota Lift Cylinder, Passenger Side
Part Number: 68950-80107
$47.67 MSRP: $66.35
You Save: $18.68 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay Assembly, Back Door; Hatch, Right; Back Glass; Liftgate; Tailgate; Door Support; Support Cylinder; Stay Assembly, Back Door, Passenger Side; Lift Support
- Manufacturer Note: W(REAR SPOILER)
- Position: Passenger Side
Fits the following Toyota Models:
- Celica | 2000-2005 | GT, GTS | 4 Cyl 1.8 L GAS
View related parts
Toyota Lift Cylinder, Driver Side
Part Number: 68960-49365
$42.53 MSRP: $59.20
You Save: $16.67 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay Assembly, Back Door; Hatch Lift Support, Left; Back Glass Lift Support; Liftgate Lift Support; Door Lift Support; Stay Assembly, Back Door, Driver Side; Lift Support
- Position: Driver Side
- Replaces: 68960-49257, 68960-49268
Fits the following Toyota Models:
- Highlander | 2009-2013 | Base, Hybrid, Hybrid Limited, Limited, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
Toyota Lift Cylinder, Passenger Side
Part Number: 68950-48120
$45.28 MSRP: $63.02
You Save: $17.74 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay Assembly, Back Door; Back Glass Lift Support; Liftgate Lift Support; Door Lift Support; Lift Support
- Position: Passenger Side
Fits the following Toyota Models:
- Highlander | 2008-2009 | Base, Hybrid, Hybrid Limited, Limited, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
Toyota Lift Cylinder, Driver Side
Part Number: 68960-80019
$56.03 MSRP: $78.00
You Save: $21.97 (29%)
Product Specifications
- Other Name: Stay Assembly, Back Door; Back Glass Lift Support; Liftgate; Tailgate; Door Lift Support; Support Cylinder; Stay Assembly, Back Door, Driver Side
- Manufacturer Note: W(REAR SPOILER & REAR WIPER)
- Position: Driver Side
- Replaces: 68960-80001, 68960-29895
Fits the following Toyota Models:
- Celica | 1994-1999 | GT, ST | 4 Cyl 1.8 L GAS, 4 Cyl 2.2 L GAS

| Page 1 of 19 |Next >

1-20 of 378 Results

Toyota Liftgate Lift Support

Choose genuine Liftgate Lift Support that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Liftgate Lift Support for your Toyota ? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Toyota Liftgate Lift Support Parts and Q&A

Lift Cylinder, Driver Side
68908-39025
Q: How to replace the Liftgate Lift Support on the left-hand side on Toyota 4Runner?
A:
First prepare the LH side by removing the 2 bolts and the damper stay which are attached to the door panel while holding the hood with care to detach the hood support. Detaching the damper stay from the vehicle body requires first loosening the bolt then removing the stay from its position. When installing the damper stay use three bolts with torque specifications of 19.5 N.m for the door while the body requires 17.5 N.m torque. Installation procedures for the RH side follow the same method.
Lift Cylinder, Passenger Side
68950-49355
Q: How to Properly Install Liftgate Lift Support on Toyota Highlander?
A:
The back window stay assembly should first require a proper rear wiper motor assembly installation using a centering jig to preserve the correct wipe angle. To replace the back window stay bolt you should clean the threaded body surface with a non-residue solvent followed by bolt installation with a torque force of 22 Nm (224 kgf-cm, 16 ft-lbf). The threads of reusable bolts require Toyota Genuine Adhesive 1324 or Three Bond 1324 or another equivalent before installation. It is essential to avoid handling the piston rod during back window stay assembly installation and to forego wearing cotton gloves. The installation starts with attaching the two stop rings to the assembly while double-checking the hood support assembly is properly placed within the ball joint. Start by removing the back window upper trim panel assembly followed by easing out the back door trim cover LH (without power back door) then the back door service hole cover LH (with power back door), the power back door rod detachment (with power back door) and continue by taking out both the back door trim cover RH, back door lock cover (for glass hatch type), assist strap hole cover, assist strap assembly, and back door trim panel assembly. The following components need removal for the task: rear wiper shaft cover alongside rear wiper arm head cap and rear wiper arm and blade assembly, then the rear wiper link cap, wiper link pivot and motor assembly (for glass hatch type). Put the rear wiper motor assembly together with the rear wiper link pivot and rear wiper link cap before adding the rear wiper arm and blade assembly and rear wiper arm head cap and rear wiper shaft cover in the end. Close the process by following these steps: Advance by putting in the back door trim panel assembly then the assist strap assembly, assist strap hole cover, back door lock cover (when utilizing glass hatch type), back door trim cover LH (both with and without power back door), connect the power back door rod (if using power back door), fix the back door service hole cover LH (additionally for power back door), back door trim cover RH and back window upper trim panel assembly.