Other Name: Regulator Assembly, Front Door Window; Window Regulator, Front Right; Power Regulator; Regulator Assembly, Front Door Window, Passenger Side
Other Name: Regulator Assembly, Front Door Window; Power Window Regulator Assembly; Window Regulator; Regulator; Regulator Assembly, Front Door Window, Passenger Side
Other Name: Regulator Sub-Assembly; Regulator Sub-Assembly, Rear Door Window, Passenger Side
Position: Passenger Side
Fits the following Toyota Models:
Corolla | 2020-2023 | Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, SE Apex, SE Nightshade, XLE, XSE, XSE Apex | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
Other Name: Regulator Sub-Assembly; Window Regulator, Rear Left; Regulator; Regulator Sub-Assembly, Rear Door Window, Driver Side
Position: Driver Side
Fits the following Toyota Models:
Camry | 2012-2017 | Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, SE Sport, Special Edition, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
Other Name: Regulator Sub-Assembly; Regulator Sub-Assembly, Front Door Window, Passenger Side
Position: Passenger Side
Fits the following Toyota Models:
Corolla | 2020-2023 | Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, SE Apex, SE Nightshade, XLE, XSE, XSE Apex | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
Other Name: Regulator Sub-Assembly; Window Regulator, Front Left; Regulator Sub-Assembly, Front Door Window, Driver Side
Position: Driver Side
Fits the following Toyota Models:
Corolla | 2019-2022 | Hybrid LE, L, LE, SE, SE Apex, SE Nightshade, XLE, XSE, XSE Apex | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
Other Name: Regulator Assembly, Front Door Window; Window Regulator, Front Right; Power Regulator; Regulator Assembly, Front Door Window, Passenger Side
Manufacturer Note: W(POWER WINDOW)
Position: Passenger Side
Fits the following Toyota Models:
RAV4 | 1996-2000 | Base | 4 Cyl 2.0 L GAS
| Page 1 of 31 |Next >
1-20 of 608 Results
Toyota Window Regulator Parts Questions & Experts Answers
Q: How to remove the rear door window regulator on Toyota Land Cruiser?
A: The first step to remove the rear door window regulator requires disconnecting the negative battery cable for at least ninety seconds so the SRS system can be fully disabled. You must separate the rear door inside handle bezel and also remove the rear door armrest base panel assembly and assist grip cover and rear door trim board sub-assembly followed by the rear inner door glass Weather Strip and rear speaker set then eliminate the rear door service hole cover and rear door glass run and rear door rear lower window frame sub-assembly and rear door quarter window glass and the last step is to disassemble the rear door glass sub-assembly. Use a T25 "TORX" driver to remove the 3 screws securing the motor on the rear power window regulator assembly along with its sub-assembly while preventing the motor from falling and sustaining damage.