How to service and repair Liftgate Lift Support on Toyota Venza?

The procedure to handle trunk/liftgate shock/support service and repairs begins by removing back door stay assembly with proper care to keep away from the piston rod and maintaining cylinder hold during maintenance. The application of cotton gloves along with hard surfaces on the door stay will result in gas leaks thus prevent it until the piston rod becomes deformed. A screwdriver will detach the stop ring from the groove yet the tip needs protection through taping. The technician needs to separate the ball joint before removing the back door stay assembly under proper back door support. The first task requires the removal of both the 2 bolts holding the back door lower damper stay bracket. After this step, move onto removing the back door upper damper stay bracket by taking out its 2 bolts.

How should the liftgate lift support assembly be disposed of safely on Toyota Venza?

Position the back door stay assembly horizontally in a vise machine where the piston rod remains fully extended for disposal purposes. Use safety glasses while utilizing a metal saw to make the groove according to the illustration between points A and B. The figures in the illustration determine the cut placement. The accepted cut dimension amounts to 80.0 mm which corresponds to 3.150 in. During the disposal procedure the harmless colorless and odorless gas inside the assembly needs protection through a cloth or alternative material because metal debris might disperse.

OEM Toyota Venza Liftgate Lift Support

Back Door Stay

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Liftgate Lift Supports found

View related parts
Toyota Venza Strut, Driver Side
Part Number: 68960-0T023
$41.22 MSRP: $57.37
You Save: $16.15 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay Assembly, Back Door; Hatch Lift Support, Left; Liftgate Lift Support; Door Lift Support; Stay Assembly, Back Door, Driver Side; Lift Support
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2012-2015 Toyota Venza | LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Lift Cylinder, Driver Side
Part Number: 68960-0T013
$44.68 MSRP: $62.19
You Save: $17.51 (29%)
ADD TO CART
Product Specifications
- Other Name: Stay Assembly, Back Door; Hatch, Left; Back Glass; Liftgate; Tailgate; Door Support; Strut; Stay Assembly, Back Door, Driver Side; Lift Support
- Manufacturer Note: WITH(EASY CLOSER & POWER BACK DOOR)
- Position: Driver Side
- Replaces: 68960-0T012
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2011-2015 Toyota Venza | Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Strut, Passenger Side
Part Number: 68950-0T023
$41.22 MSRP: $57.37
You Save: $16.15 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay Assembly, Back Door; Hatch Lift Support, Right; Liftgate Lift Support; Door Lift Support; Stay Assembly, Back Door, Passenger Side; Lift Support
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2012-2015 Toyota Venza | LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Lift Cylinder, Passenger Side
Part Number: 68950-0T013
$49.22 MSRP: $68.51
You Save: $19.29 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay Assembly, Back Door; Hatch Lift Support, Right; Back Glass Lift Support; Liftgate Lift Support; Door Lift Support; Strut; Stay Assembly, Back Door, Passenger Side; Lift Support
- Manufacturer Note: WITH(EASY CLOSER & POWER BACK DOOR)
- Position: Passenger Side
- Replaces: 68950-0T012
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2011-2015 Toyota Venza | Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Lift Cylinder, Driver Side
Part Number: 68960-0T021
$115.88 MSRP: $162.65
You Save: $46.77 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hatch Lift Support, Left; Back Glass Lift Support; Liftgate Lift Support; Door Lift Support; Strut; Stay Assembly, Back Door, Driver Side; Lift Support
- Position: Driver Side
- Replaces: 68960-0T020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2011 Toyota Venza | Base | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Lift Cylinder, Driver Side
Part Number: 68960-0T011
$120.18 MSRP: $170.12
You Save: $49.94 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Multiple-Pnc; Hatch, Back Glass, Liftgate, Tailgate, Door Lift Support; Strut; Stay Assembly, Back Door, Driver Side; Lift Support
- Manufacturer Note: WITH(EASY CLOSER & POWER BACK DOOR)
- Position: Driver Side
- Replaces: 68960-0T010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2011 Toyota Venza | Base | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Lift Cylinder, Passenger Side
Part Number: 68950-0T021
$114.71 MSRP: $161.02
You Save: $46.31 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hatch Lift Support, Right; Back Glass Lift Support; Liftgate Lift Support; Door Lift Support; Strut; Stay Assembly, Back Door, Passenger Side; Lift Support
- Position: Passenger Side
- Replaces: 68950-0T020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2011 Toyota Venza | Base | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Lift Cylinder, Passenger Side
Part Number: 68950-0T011
$120.18 MSRP: $170.12
You Save: $49.94 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hatch Lift Support, Right; Back Glass Lift Support; Liftgate Lift Support; Door Lift Support; Strut; Stay Assembly, Back Door, Passenger Side; Lift Support
- Manufacturer Note: WITH(EASY CLOSER & POWER BACK DOOR)
- Position: Passenger Side
- Replaces: 68950-0T010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2011 Toyota Venza | Base | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Lift Cylinder, Driver Side
Part Number: 68920-48100
$354.34 MSRP: $519.32
You Save: $164.98 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Unit Assembly, Power Back Door; Rear Left Liftgate Support; Back Glass Lift; Door Lift Support; Lifter Assembly; Unit Assembly Set, Power Back Door, Driver Side
- Manufacturer Note: MARK=LH:75L
- Position: Driver Side
- Replaced by: 68910-48H00
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2023 Toyota Venza | LE, Limited, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Venza Lift Cylinder, Passenger Side
Part Number: 68910-48120
$354.34 MSRP: $519.32
You Save: $164.98 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Unit Assembly, Power Back Door; Rear Right Liftgate Support; Back Glass Lift; Door Lift Support; Lifter Assembly; Unit Assembly Set, Power Back Door, Passenger Side
- Manufacturer Note: MARK=RH:75R
- Position: Passenger Side
- Replaced by: 68910-48H00
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2023 Toyota Venza | LE, Limited, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Venza Motor & Bracket, Driver Side
Part Number: 68910-0T012
Product Specifications
- Other Name: Unit Assembly, Power Back Door; Tailgate Pull Down Motor; Motor
- Manufacturer Note: WITH(EASY CLOSER & POWER BACK DOOR)
- Position: Driver Side
- Replaces: 68910-0T010, 68910-0T011
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2015 Toyota Venza | Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

Toyota Venza Liftgate Lift Support

Choose genuine Liftgate Lift Support that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Liftgate Lift Support for your Toyota Venza? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Venza parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Toyota Venza Liftgate Lift Support Parts and Q&A

Lift Cylinder, Driver Side
68960-0T013
Q: How to service and repair Liftgate Lift Support on Toyota Venza?
A:
The procedure to handle trunk/liftgate shock/support service and repairs begins by removing back door stay assembly with proper care to keep away from the piston rod and maintaining cylinder hold during maintenance. The application of cotton gloves along with hard surfaces on the door stay will result in gas leaks thus prevent it until the piston rod becomes deformed. A screwdriver will detach the stop ring from the groove yet the tip needs protection through taping. The technician needs to separate the Ball Joint before removing the back door stay assembly under proper back door support. The first task requires the removal of both the 2 bolts holding the back door lower damper stay bracket. After this step, move onto removing the back door upper damper stay bracket by taking out its 2 bolts.
Lift Cylinder, Passenger Side
68950-0T013
Q: How should the liftgate lift support assembly be disposed of safely on Toyota Venza?
A:
Position the back door stay assembly horizontally in a vise machine where the piston rod remains fully extended for disposal purposes. Use safety glasses while utilizing a metal saw to make the groove according to the illustration between points A and B. The figures in the illustration determine the cut placement. The accepted cut dimension amounts to 80.0 mm which corresponds to 3.150 in. During the disposal procedure the harmless colorless and odorless gas inside the assembly needs protection through a cloth or alternative material because metal debris might disperse.

Related Toyota Venza Parts

Browse Toyota Venza Liftgate Lift Support by Years

2023 2022 2021 2015 2014 2013 2012 2011 2010 2009