How to install the Trunk Lid Latch assembly with and without Easy Closer on Toyota Venza?

Installation To fit the back door lock assembly, apply the MP grease and adhesive on the threads of the bolts. Tighten with 3 bolts with a torque of 8.0 Nm, and you connect the connector and clamp. In the case of Easy Closer, repeat the above steps and include an additional bolt at the same level of torque.

How to remove the Trunk Lid Latch assembly on Toyota Venza?

The back door panel trim should be removed in order to get back to the back door lock assembly. In cars that do not have the Easy Closer, unscrew the clamp, unplug the connector and unscrew 3 bolts. With the Easy Closer, one will have to unconnect the connector, disengage the clamp and will have to remove 4 bolts.

OEM Toyota Venza Trunk Lid Latch

Luggage Compartment Door Lock Assembly

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Trunk Lid Latches found

View related parts
Toyota Venza Gate Lock, Rear
Part Number: 69350-0E100
$348.79 MSRP: $497.99
You Save: $149.20 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Back Door; Liftgate Latch; Tailgate Lock Actuator; Trunk Lock Actuator; Door Lock Actuator; Lock Actuator; Lock Assembly; Lock Assembly, Back Door, W/Courtesy Lamp Switch
- Position: Rear
- Replaces: 69350-0T010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2015 Toyota Venza | Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Lock Actuator, Rear
Part Number: 69350-0T030
$371.47 MSRP: $544.40
You Save: $172.93 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Back Door; Liftgate Latch; Tailgate Lock Actuator; Trunk Lock Actuator; Door Lock Actuator; Lock Assembly; Lock Assembly, Back Door, W/Courtesy Lamp Switch
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2015 Toyota Venza | Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Lock Actuator, Rear
Part Number: 69350-42080
$346.23 MSRP: $494.33
You Save: $148.10 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Back Door; Liftgate Latch; Tailgate Lock Actuator; Trunk Lock Actuator; Door Lock Actuator; Lock Assembly; Lock Assembly, Back Door, W/Courtesy Lamp Switch
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2023 Toyota Venza | LE, Limited, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)

Toyota Venza Trunk Lid Latch

If you're thinking about purchasing OEM parts for your Toyota Venza, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Venza Trunk Lid Latch at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota Venza Trunk Lid Latch Parts and Q&A

Gate Lock, Rear
69350-0E100
Q: How to install the Trunk Lid Latch assembly with and without Easy Closer on Toyota Venza?
A: Installation To fit the back door lock assembly, apply the MP grease and adhesive on the threads of the bolts. Tighten with 3 bolts with a torque of 8.0 Nm, and you connect the connector and clamp. In the case of Easy Closer, repeat the above steps and include an additional bolt at the same level of torque.
Lock Actuator, Rear
69350-0T030
Q: How to remove the Trunk Lid Latch assembly on Toyota Venza?
A: The back door panel trim should be removed in order to get back to the back door lock assembly. In cars that do not have the Easy Closer, unscrew the clamp, unplug the connector and unscrew 3 bolts. With the Easy Closer, one will have to unconnect the connector, disengage the clamp and will have to remove 4 bolts.