How to remove and replace the liftgate lift support on Toyota Sequoia?

Begin by sliding the clip to detach the back door stay from both the back door and support it with your hand. The clip needs to be slid for a second time to extract both the bolts and back door stay from the body. Drilling a hole between 2.0 and 3.0 millimeters (0.079 and 0.118 inches) at the bottom of the back door stay allows pressure to escape before disposal but handle the flying chips during this procedure. Handle the back door stay with care since disassembling it or scratching the piston rod should be avoided while preventing paint and oil from contacting it. Avoid rotating the piston rod alongside the cylinder when the back door stay operates in its maximum extension position. Apply 19 N.m (195 kgf.cm, 14 ft.lbf) of torque when securing both the bolts and back door stay to the body before hooking them up to the back door with matching torque force.

How to install Liftgate Lift Support on Toyota Sequoia?

The first step for installing the back door support includes applying adhesive to both back door stay upper bracket bolts before installing the bracket while torquing the bolts to 20 Nm (199 kgf-cm, 14 ft-lbf). Proceed by applying adhesive to the 2 bolts of the back door stay lower bracket before torquing them to 20 Nm (199 kgf-cm, 14 ft-lbf). Proceed with attaching the back door stay cover through its clips. You should install the back door side stopper using 2 bolts while torqueing them to 7.8 Nm (80 kgf-cm, 69 in-lbf). Moving on, establish the rear combination light assembly. After supporting the back door with your hand you should install the back door damper stay sub-assembly starting with the lower side stop ring then the upper side stop ring.

OEM Toyota Sequoia Liftgate Lift Support

Back Door Stay

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

17 Liftgate Lift Supports found

View related parts
Toyota Sequoia Lift Cylinder, Driver Side
Part Number: 68908-0C050
$43.73 MSRP: $60.87
You Save: $17.14 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Stay Sub-Assembly, Back; Hatch Lift Support, Left; Back Glass; Liftgate; Tailgate; Door Support; Support Cylinder; Stay Sub-Assembly, Back Door Damper, Driver Side; Lift Support
- Position: Driver Side
- Replaces: 68908-0C020, 68908-0C021
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2022 Toyota Sequoia | Limited, Nightshade, Platinum, TRD Pro | 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Lift Cylinder, Driver Side
Part Number: 68908-0C040
$44.08 MSRP: $61.37
You Save: $17.29 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay Sub-Assembly, Back; Hatch Lift Support, Left; Back Glass; Liftgate; Tailgate; Door Support; Support Cylinder; Stay Sub-Assembly, Back Door Damper, Driver Side; Lift Support
- Position: Driver Side
- Replaces: 68908-0C010, 68908-0C011
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2022 Toyota Sequoia | SR5, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Lift Cylinder, Passenger Side
Part Number: 68907-0C050
$43.73 MSRP: $60.87
You Save: $17.14 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay Sub-Assembly, Back; Hatch Lift Support, Rear Right; Back Glass, Liftgate, Tailgate, Door Support; Support Cylinder; Stay Sub-Assembly, Back Door Damper, Passenger Side; Lift Support
- Position: Passenger Side
- Replaces: 68907-0C021, 68907-0C020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2022 Toyota Sequoia | Limited, Nightshade, Platinum, TRD Pro | 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Lift Cylinder, Passenger Side
Part Number: 68907-0C040
$44.08 MSRP: $61.37
You Save: $17.29 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay Sub-Assembly, Back; Hatch Lift Support, Rear Right; Back Glass, Liftgate, Tailgate, Door Support; Support Cylinder; Stay Sub-Assembly, Back Door Damper, Passenger Side; Lift Support
- Position: Passenger Side
- Replaces: 68907-0C010, 68907-0C011
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2022 Toyota Sequoia | SR5, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Lift Cylinder, Passenger Side
Part Number: 68905-0C041
$64.33 MSRP: $90.30
You Save: $25.97 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay Sub-Assembly, Back; Back Glass Lift Support; Liftgate Lift Support; Door Lift Support; Lift Support; Stay Sub-Assembly, Back Door, Passenger Side
- Manufacturer Note: COLD SPEC
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2006-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Lift Cylinder, Driver Side
Part Number: 68905-09025
$134.88 MSRP: $190.94
You Save: $56.06 (30%)
ADD TO CART
Product Specifications
- Other Name: Multiple-Pnc; Hatch, Back Glass, Liftgate, Tailgate, Door Lift Support; Support Cylinder; Stay Sub-Assembly, Back Door, Driver Side; Lift Support
- Manufacturer Note: COLD SPEC
- Position: Driver Side
- Replaces: 68905-09035
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Lift Cylinder, Passenger Side
Part Number: 68905-09020
$134.88 MSRP: $190.94
You Save: $56.06 (30%)
ADD TO CART
Product Specifications
- Other Name: Multiple-Pnc; Hatch, Back Glass, Liftgate, Tailgate, Door Lift Support; Support Cylinder; Stay Sub-Assembly, Back Door, Passenger Side; Lift Support
- Manufacturer Note: COLD SPEC
- Position: Passenger Side
- Replaces: 68905-09030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Support Cylinder, Driver Side
Part Number: 68960-0C010
$36.20 MSRP: $50.38
You Save: $14.18 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay Assembly, Back Door; Stay Assembly, Back Door, Driver Side
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023-2024 Toyota Sequoia | SR5 | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Sequoia Support Cylinder, Passenger Side
Part Number: 68950-0C010
$36.20 MSRP: $50.38
You Save: $14.18 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay Assembly, Back Door; Stay Assembly, Back Door, Passenger Side
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023-2024 Toyota Sequoia | SR5 | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Sequoia Lift Cylinder, Driver Side
Part Number: 68920-0C011
$315.94 MSRP: $451.08
You Save: $135.14 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Unit Assembly, Power Back Door; Support Cylinder; Power Cylinder; Unit Assembly, Power Back Door, Driver Side
- Manufacturer Note: SR5-PREMIUM
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023-2024 Toyota Sequoia | Capstone, Limited, Platinum, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Sequoia Support Cylinder, Driver Side
Part Number: 68920-0C010
$336.67 MSRP: $480.70
You Save: $144.03 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Unit Assembly, Power Back Door; Unit Assembly, Power Back Door, Driver Side
- Manufacturer Note: SR5 PREM
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023 Toyota Sequoia | Capstone, Limited, Platinum, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Sequoia Lift Cylinder, Passenger Side
Part Number: 68910-0C041
$306.73 MSRP: $437.94
You Save: $131.21 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Unit Assembly, Power Back Door; Support Cylinder; Power Cylinder; Unit Assembly, Power Back Door, Passenger Side
- Manufacturer Note: SR5-PREMIUM
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023-2024 Toyota Sequoia | Capstone, Limited, Platinum, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Sequoia Support Cylinder, Passenger Side
Part Number: 68910-0C040
$310.58 MSRP: $443.44
You Save: $132.86 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Unit Assembly, Power Back Door; Unit Assembly, Power Back Door, Passenger Side
- Manufacturer Note: SR5 PREM
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023 Toyota Sequoia | Capstone, Limited, Platinum, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Sequoia Pulldown Motor, Rear
Part Number: 68910-0C030
$609.48 MSRP: $893.21
You Save: $283.73 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Unit Assembly, Power Back Door; Tailgate Pull Down Motor, Rear; Trunk Lid Pull Down Motor; Motor
- Manufacturer Note: TRD PRO PACKAGE
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2018-2022 Toyota Sequoia | Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Lifter Assembly, Driver Side
Part Number: 68940-0C010
$24.49 MSRP: $34.08
You Save: $9.59 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay Assembly, Back Window; Strut; Stay Assembly, Back Window, Driver Side
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023-2024 Toyota Sequoia | Capstone, Limited, Platinum, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Sequoia Lifter Assembly, Passenger Side
Part Number: 68930-0C010
$24.49 MSRP: $34.08
You Save: $9.59 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay Assembly, Back Window; Strut; Stay Assembly, Back Window, Passenger Side
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023-2024 Toyota Sequoia | Capstone, Limited, Platinum, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Sequoia Pulldown Motor
Part Number: 68910-0C020
$341.45 MSRP: $487.58
You Save: $146.13 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Unit Assembly, Power Back Door; Tailgate Pull Down Motor; Trunk Lid Pull Down Motor; Motor
- Manufacturer Note: POWER BACK DOOR-WITH
- Replaces: 68910-0C010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2018 Toyota Sequoia | Limited, Platinum, SR5, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

Toyota Sequoia Liftgate Lift Support

Choose genuine Liftgate Lift Support that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Liftgate Lift Support for your Toyota Sequoia? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Sequoia parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

The Toyota Sequoia Liftgate Lift Support represents a critical component which advances both the functionality and safety attributes of the Toyota Sequoia full-sized SUV because of its reputation as reliable and high-performance vehicle. The Liftgate Lift Support operates with gas-charged cylinders which generate the required pressure needed to easily lift and sustain the rear trunk lid so users can access their cargo without needing both hands for support during loading or unloading. The Liftgate Lift Support functions across several Toyota Sequoia variants to enable safe and smooth liftgate operation preventing both accidents and impaired functionality. Toyota dedicated years to designing the Liftgate Lift Support for excellence thus creating an outstanding market feature. The Liftgate Lift Support stands out in the market for its durable approach combined with maintenance practices because proper upkeep prevents safety issues from worn components. The Liftgate Lift Support in Toyota Sequoia models delivers superior usability to users while improving vehicle safety which makes it an essential component of the entire lineup. This exemplary engineering achievement combined with the brand's commitment to quality defines the Liftgate Lift Support which protects the the automaker Sequoia's position as a popular vehicle among families and adventurers.

Toyota Sequoia Liftgate Lift Support Parts and Q&A

Lift Cylinder, Passenger Side
68905-09020
Q: How to remove and replace the liftgate lift support on Toyota Sequoia?
A:
Begin by sliding the clip to detach the back door stay from both the back door and support it with your hand. The clip needs to be slid for a second time to extract both the bolts and back door stay from the body. Drilling a hole between 2.0 and 3.0 millimeters (0.079 and 0.118 inches) at the bottom of the back door stay allows pressure to escape before disposal but handle the flying chips during this procedure. Handle the back door stay with care since disassembling it or scratching the piston rod should be avoided while preventing paint and oil from contacting it. Avoid rotating the piston rod alongside the cylinder when the back door stay operates in its maximum extension position. Apply 19 N.m (195 kgf.cm, 14 ft.lbf) of torque when securing both the bolts and back door stay to the body before hooking them up to the back door with matching torque force.
Lift Cylinder, Driver Side
68908-0C050
Q: How to install Liftgate Lift Support on Toyota Sequoia?
A:
The first step for installing the back door support includes applying adhesive to both back door stay upper bracket bolts before installing the bracket while torquing the bolts to 20 Nm (199 kgf-cm, 14 ft-lbf). Proceed by applying adhesive to the 2 bolts of the back door stay lower bracket before torquing them to 20 Nm (199 kgf-cm, 14 ft-lbf). Proceed with attaching the back door stay cover through its clips. You should install the back door side stopper using 2 bolts while torqueing them to 7.8 Nm (80 kgf-cm, 69 in-lbf). Moving on, establish the rear combination light assembly. After supporting the back door with your hand you should install the back door damper stay sub-assembly starting with the lower side stop ring then the upper side stop ring.

Related Toyota Sequoia Parts

Browse Toyota Sequoia Liftgate Lift Support by Years

2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001