How to replace the Brake Pad Set on Toyota Tundra?

A brake pads replacement requires initial front wheel removal together with pad lining thickness check for minimum 1.0 mm (0.039 inch) standard; new pads are needed when thickness falls below. Start pad replacement by first removing the clip and two pins along with the anti-rattle spring. Proceed to remove both pads together with their accompanying four anti-squeal shims. However, the anti-rattle spring and clip can stay if they remain deformation-free with no cracks or wear and can be cleaned from rust and dirt. New pad installation includes disc thickness and runout testing and requires replacement of anti-squeal shims when replacing the pads. Use a monkey wrench handle or its equivalent to push brake fluid from the reservoir while pushing in the pistons through the taped handle one wheel at a time until the opposite piston stops escaping. The piston should not require extra force while bleeding brake fluid through the bleeder plug if necessary. Install new anti-squeal shims on the pads while spreading disc brake grease across both sides of each inner shim before inserting the pads without exposing the rubbing surface to oil or grease. The installation order begins with the anti-rattle spring followed by 2 pins and the clip leading up to front wheel reinstallation that requires a torque of 113 Nm (1,150 kgf-cm, 83 ft. lbs.). Check that the fluid reaches the max line after you have pressed the brake pedal several times.

OEM Toyota Tundra Brake Pad Set

Disc Brake Pad Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Brake Pad Sets found

View related parts
Toyota Tundra Brake Pads, Front
Part Number: 04465-0C012
$75.37 MSRP: $102.31
You Save: $26.94 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake; Disc Brake Pad Set, Front; Disc Brake Pad Kit; Front Pads; Pad Kit, Disc Brake, Front; Disc Brake Pad Set
- Position: Front
- Replaces: 04465-0C011
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2003 Toyota Tundra | Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 8 Cyl 4.7 L GAS
View related parts
Toyota Tundra Pad Kit, Disc Brake, Front
Part Number: 04465-35290
$75.25 MSRP: $104.50
You Save: $29.25 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake; Disc Brake Pad Set; Brake Pads
- Manufacturer Note: MARK SUMITOMO PS558H
- Position: Front
- Replaces: 04465-35250
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2006 Toyota Tundra | Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Toyota Tundra Brake Pads, Front
Part Number: 04465-0C020
$75.25 MSRP: $104.50
You Save: $29.25 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake; Disc Brake Pad Set, Front; Disc Brake Pad Kit; Front Pads; Pad Kit, Disc Brake, Front; Disc Brake Pad Set
- Manufacturer Note: MARK ADVICS PV565H
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2017 Toyota Tundra | 1794 Edition, Base, Limited, Platinum, SR, SR5, TRD Pro | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Tundra Brake Pads, Rear
Part Number: 04466-02340
$63.12 MSRP: $88.61
You Save: $25.49 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake; Disc Brake Pad Set, Rear; Disc Brake Pad Kit; Rear Pads; Pad Kit, Disc Brake, Rear; Disc Brake Pad Set
- Manufacturer Note: MARK ADVICS VC071
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2018-2021 Toyota Tundra | 1794 Edition, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 8 Cyl 4.6 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Tundra Brake Pads, Front
Part Number: 04465-02440
$93.09 MSRP: $130.67
You Save: $37.58 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake; Disc Brake Pad Set, Front; Disc Brake Pad Kit; Front Pads; Pad Kit, Disc Brake, Front; Disc Brake Pad Set
- Manufacturer Note: MARK ADVICS VC070H
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2018-2021 Toyota Tundra | 1794 Edition, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 8 Cyl 4.6 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Tundra Brake Pads, Rear
Part Number: 04466-0C010
$53.78 MSRP: $78.00
You Save: $24.22 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake; Disc Brake Pad Set, Rear; Disc Brake Pad Kit; Rear Pads; Pad Kit, Disc Brake, Rear; Disc Brake Pad Set
- Manufacturer Note: MARK ADVICS PS558H
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2017 Toyota Tundra | 1794 Edition, Base, Limited, Platinum, SR, SR5, TRD Pro | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Tundra Pad Kit, Disc Brake, Rear
Part Number: 04466-60191
$62.20 MSRP: $87.31
You Save: $25.11 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake
- Manufacturer Note: MARK ADVICS VC107
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2022-2024 Toyota Tundra | 1794 Edition, Capstone, Limited, Platinum, SR, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.4 L GAS
View related parts
Toyota Tundra Brake Pads, Front
Part Number: 04465-02580
$97.04 MSRP: $136.22
You Save: $39.18 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake; Disc Brake Pad Set, Front; Front Pads; Pad Kit, Disc Brake, Front
- Manufacturer Note: MARK ADVICS VC084H
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2022-2024 Toyota Tundra | 1794 Edition, Capstone, Limited, Platinum, SR, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.4 L GAS

Toyota Tundra Brake Pad Set

Choose genuine Brake Pad Set that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Brake Pad Set for your Toyota Tundra? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Tundra parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

The Brake Pad Set of Toyota Tundra pickup are responsible for friction and change of kinetic energy to heat energy thus helping the pickup to stop. These are made from steel backing plates with friction material; they transfer material to the rotor to generate friction for the intended braking. Ideally one or two pads are used per rotor and these are operated by means of a caliper. Brake pads also degenerate with usage and are thus expected to be replaced from time to time Instrumentation is usually provided to notify drivers when this is required. Break pads are categorized depending on the materials used and include Non-Metallic, Semi-Metallic, fully metallic and Ceramic where each of the type was seen to have a unique friction factor, wear rate and Operating Noise factor. The brake pad set of Tundra should be checked or replaced every 50,000 mile so as to keep it on high performance and safety.

Toyota Tundra Brake Pad Set Parts and Q&A

Brake Pads, Front
04465-0C012
Q: How to replace the Brake Pad Set on Toyota Tundra?
A:
A brake pads replacement requires initial front wheel removal together with pad lining thickness check for minimum 1.0 mm (0.039 inch) standard; new pads are needed when thickness falls below. Start pad replacement by first removing the clip and two pins along with the anti-rattle spring. Proceed to remove both pads together with their accompanying four anti-squeal shims. However, the anti-rattle spring and clip can stay if they remain deformation-free with no cracks or wear and can be cleaned from rust and dirt. New pad installation includes disc thickness and runout testing and requires replacement of anti-squeal shims when replacing the pads. Use a monkey wrench handle or its equivalent to push brake fluid from the reservoir while pushing in the pistons through the taped handle one wheel at a time until the opposite piston stops escaping. The piston should not require extra force while bleeding brake fluid through the bleeder plug if necessary. Install new anti-squeal shims on the pads while spreading disc brake grease across both sides of each inner shim before inserting the pads without exposing the rubbing surface to oil or grease. The installation order begins with the anti-rattle spring followed by 2 pins and the clip leading up to front wheel reinstallation that requires a torque of 113 Nm (1,150 kgf-cm, 83 ft. lbs.). Check that the fluid reaches the max line after you have pressed the brake pedal several times.

Related Toyota Tundra Parts

Browse Toyota Tundra Brake Pad Set by Years

2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000