Other Name: Sensor, Speed, Front Right-Hand; ABS Wheel Speed Sensor, Front Right, Rear Right; Speed Sensor; Front and Rear Passenger Side Speed Sensors.
Position: Front Passenger Side
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2018-2021 Toyota Tundra | 1794 Edition, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 8 Cyl 4.6 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
Other Name: Sensor, Speed, Front Right-Hand; ABS Wheel Speed Sensor, Front Right, Rear Right; Speed Sensor; Front/Rear Passenger Side ABS Wheel Speed Sensor.
Position: Front Passenger Side
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2007-2017 Toyota Tundra | 1794 Edition, Base, Limited, Platinum, SR, SR5, TRD Pro | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
Other Name: Sensor, Speed, Front Left-Hand; ABS Wheel Speed Sensor, Front Left; ABS Sensor; Front Speed Sensor; Sensor, Speed, Front Driver Side
Position: Front Driver Side
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2000-2003 Toyota Tundra | Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 8 Cyl 4.7 L GAS
| Page 1 of 2 |Next >
1-20 of 23 Results
Toyota Tundra Speed Sensor
If you're thinking about purchasing OEM parts for your Toyota Tundra, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Tundra Speed Sensor at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.
Q: How to service and repair the Speed Sensor NO.1 and NO.2 on Toyota Tundra?
A: The steps to repair Vehicle Speed Sensor NO.1 are: To disconnect the connector, remove connector, dismantle, remove the O-ring, clip, and gear. Install with a new O-ring, which is coated with ATF, a torque of 16 Nm should be used, and reconnect. In the case of NO.2 repeat and use a torque of 5.4 Nm.
Q: How to install the rear speed sensor on Toyota Tundra?
A: To fix the rear speed sensor, fix the skid control sensor wire and tighten the clamps and the clips. Install the LH and RH speed sensors with the recommended torque followed by torquing the rear wheels. Re-connect the negative battery terminal, and possibly initialize, and test the speed sensor signal.