OEM Toyota Tundra Wheel Stud

Toyota Tundra Wheel Stud Parts and Q&A

• Wheel Stud
  90942-02082
  Q: How to Replace a Wheel Stud on the Front Wheel Hub on Toyota Tundra?

  A:

  The appropriate procedure to replace the front wheel wheel stud requires removal of the front wheel followed by Brake Caliper and disc removal by disconnecting the Steering Knuckle bolt and brake line clamp before unfastening the 2 caliper and disc mounting bolts with brake caliper support throughout the process. The wheel stud removal requires Special Service Tool: 09650-17011 together with either a screwdriver or equivalent tool. To install the new wheel stud, assemble it with a washer and a nut as shown in the illustration while using a screwdriver or equivalent tool for support before removing both components. Secure the brake disc along with the caliper using 2 bolts reaching 123 Nm (1,250 kgf-cm, 90 ft. lbs.) while adding the brake line clamp to the steering knuckle through a bolt that requires torquing to 28 Nm (285 kgf-cm, 21 ft. lbs.). Reassemble the front wheel by first torquing it to 110 Nm (1,150 kgf-cm, 83 ft. lbs.) before performing several brake pedal depressions.
• Wheel Stud
  90942-02083
  Q: How to service the front Wheel Stud on Toyota Tundra?

  A:

  Service of the front wheel stud starts by removing the front wheel followed by disconnecting the left-hand side front disc Brake Caliper assembly. You must first detach the front disc followed by the removal of the front axle left wheel stud using Special Service Tool: 09650-17011 and a screwdriver to maintain the axle hub. Be cautious about damaging the stud threads. When installing a new wheel stud position a washer and hub nut on the stud followed by use of a screwdriver or equivalent tool as a hub holder before turning the hub nut until the bottom surface of the head touches the axle hub then remove washer and nut with precautions to avoid damaging threads. Reinstall the front disc followed by reconnecting the front disc brake caliper assembly on the left-hand side and finish by installing the front wheel while applying aluminum wheel torques at 131 Nm or 209 Nm torques for steel wheels.