My Garage
Cart
Make sure this part fits

Toyota 89543-0C010
ABS Sensor, Front Driver Side

2000-2007 Toyota 895430C010

Customer Questions & Expert Answers (16)
Toyota 89543-0C010 ABS Sensor, Front Driver Side
Toyota 89543-0C010 ABS Sensor, Front Driver Side
  • Part Description
    Sensor, Speed, Front Left-Hand; ABS Wheel Speed Sensor, Front Left
  • Part Name Code
    89543
  • Position
    Front Driver Side
  • Manufacturer
    Toyota
Make sure this part fits
$271.67 MSRP: $387.88
You Save: $116.21 (30%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Toyota
    Part Name Code89543
    Manufacturer Part Number89543-0C010
    Part DescriptionSensor, Speed, Front Left-Hand; ABS Wheel Speed Sensor, Front Left
    Other NamesSpeed Sensor; Front Speed Sensor; Sensor, Speed, Front Driver Side; ABS Wheel Speed Sensor
    Item Dimensions7.6 x 6.7 x 2.4 inches
    Item Weight1.30 Pounds
    PositionFront Driver Side
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerToyota
    SKU89543-0C010
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2001-2007 Toyota SequoiaLimited, SR58 Cyl 4.7 L GAS
    2000-2006 Toyota TundraBase, Limited, SR56 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you provide the right 89543-0C010 for my car? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 89543-0C010 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    How do you remove the extension housing and gasket for the 2004 Toyota Sequoia? Posted by Customer
    A:
    Unscrew the 6 bolts; if needed, tap the extension housing with a plastic hammer or a block of wood to loosen it.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What should be done after removing the front wheel for the 2003 Toyota Sequoia? Posted by Customer
    A:
    Disconnect the speed sensor connector.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What is the next step after removing the clamp bolts for the 2002 Toyota Sequoia? Posted by Customer
    A:
    Remove the bolt securing the speed sensor to the steering knuckle, also at a torque of 8.0 Nm (82 kgf-cm, 71 inch lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What is the next step after removing the clips and clamp bolts for the 2006 Toyota Sequoia? Posted by Customer
    A:
    Remove the bolt and the speed sensor from the steering knuckle, also with a torque of 8.0 N.m (82 kgf.cm, 71 in.lbf).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What should be done for installation for the 2001 Toyota Sequoia? Posted by Customer
    A:
    Follow the reverse order of removal.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What is the next step after removing the clamp bolts and clips for the 2001 Toyota Tundra? Posted by Customer
    A:
    Remove the bolt and the speed sensor from the axle carrier.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What is the first step to service and repair the rear wheel speed sensor for the 2006 Toyota Tundra? Posted by Customer
    A:
    Begin by removing the rear wheel, ensuring a torque of 113 Nm (1.150 kgf-cm, 83 ft. lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    How do you remove the speed sensor for the 2004 Toyota Tundra? Posted by Customer
    A:
    Take out the 2 clamp bolts, clamp nut, and 5 resin clips that secure the sensor wire harness to the axle and fuel tank.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    How do you install the No. 1 vehicle speed sensor for the 2005 Toyota Sequoia? Posted by Customer
    A:
    Install the No. 1 vehicle speed sensor with the bolt, ensuring to torque it to 9.8 Nm (100 kgf-cm, 86 inch lbs.) for A750E or 11.5 Nm (117 kgf-cm, 8 ft. lbs.) for A750F.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What is the first step to service and repair the Transmission Speed Sensor for the 2007 Toyota Sequoia? Posted by Customer
    A:
    Begin by removing the speedometer sensor: disconnect the sensor connector, remove the bolt and the sensor, take off the clip and the driven gear from the sensor, and remove the O-ring from the sensor.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    How do you disassemble the No. 1 vehicle speed sensor for the 2003 Toyota Sequoia? Posted by Customer
    A:
    Remove the O-ring from the speed meter driven gear assembly, then take off the clip and speed meter driven gear from the speed meter driven gear sleeve.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What is the next step after removing the clamp bolts and clips for the 2003 Toyota Tundra? Posted by Customer
    A:
    Remove the bolt and the speed sensor from the axle carrier, applying a torque of 8.0 Nm (82 kgf-cm, 71 inch lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What should be done after removing the front wheel for the 2005 Toyota Tundra? Posted by Customer
    A:
    Disconnect the speed sensor connector.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    How do you service and repair Vehicle Speed Sensor NO.2 for the 2000 Toyota Tundra? Posted by Customer
    A:
    Begin by disconnecting the NO. 2 vehicle speed sensor connector and removing the NO. 2 vehicle speed sensor by taking out the bolt and O-ring. Install a new O-ring coated with ATF to the NO. 2 vehicle speed sensor, then install the NO. 2 vehicle speed sensor with the bolt, applying a torque of 5.4 Nm (55 kgf-cm, 48 inch lbs.), and finally connect the NO. 2 vehicle speed sensor connector.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What should be used for installation of the speed sensor for the 2002 Toyota Tundra? Posted by Customer
    A:
    Use new resin clips and position them at the same angle as the removed clips.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 89543-0C010, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 89543-0C010 ABS Sensor, Front Driver Side. It is sometimes referred to as Toyota Speed Sensor. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 895430C010 ABS Sensor, Front Driver Side. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery