Other Name: Panel Sub-Assembly, Air; HVAC Temperature Control Panel; Climate Control Module; Blower Control Switch; Dash Control Unit; Panel Sub-Assembly, Air Conditioner
Fits the following Toyota Models:
Camry | 2005-2006 | Base, LE, SE, XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
Q: How to Properly Remove and Reassemble the A/C Switch in the Control Assembly on Toyota Camry?
A: The initial step for control assembly servicing and repair starts with using a screwdriver to operate the claw on the A/C switch, air intake switch and defogger switch. Users must tape the screwdriver tip to extract the switches backward. The first removal step should include taking out the heater control knobs after which the next step involves removing the heater control cable. The users can disconnect the blower speed control switch by unscrewing it with 2 screws followed by pulling out the switch along with carrying out the same procedure with the mode switch. Proceed by removing the heater control name sheet starting with screw removal from two locations and continuing with a screwdriver's use to unlock the 4 claws securing the sheet while keeping the screwdriver tip taped. The reverse procedure of disassembly defines the reassembly process.
Q: How to Service and Repair the A/C Switch Control Assembly on Toyota 4Runner?
A: The service and repair procedure for the Air Conditioning Control Assembly (Auto A/C) starts with removal of the parking brake hole cover together with the upper console panel and center cluster finish panel. The first step for the A/C control assembly removal requires users to take out the name plate before unscrewing all 3 screws to disconnect the connector. After repositioning the A/C control assembly you should attach it with the 3 screws before reconnecting the connector and installing the A/C control name plate. Reinstall first the parking brake hole cover and after that the upper console panel followed by the center cluster finish panel.
Q: How to properly reassemble the A/C Switch panel on Toyota Tacoma?
A: You can reinstall the air conditioning panel starting with bulb installation via screwdriver clockwise rotation. The first step involves connecting the REC switch with 2 claws before moving on to attach the A/C switch with additional 2 claws. Six claws should be engaged to place the heater control panel before securing it with four screws. The 3 control knob sub-assemblies need to be installed last.