OEM 2010 Toyota Yaris Brake Light Switch

2010 Toyota Yaris Brake Light Switch Parts Q&A

• Q: How to install the Brake Light Switch for the hatchback on 2010 Toyota Yaris?

  A: Begin installation of the hatchback stop light switch by placing it into the adjuster until it makes contact with the brake pedal while avoiding pedal depression followed by clockwise rotation at a quarter turn to secure it while keeping the pedal listed mentioned. The needed torque value for this assembly reaches 1.5 Nm (15 kgf-cm or 13 in-lb and less). During final checks of the installment verify that the stop light switch clears the built-in holes with a minimum gap of 0.5 mm to a maximum of 2.6 mm (0.020 - 0.102 in). Afterward you should connect the stop light switch connector to its housing. The analyst needs to mount the instrument panel under cover sub-assembly LH. When reattaching the cable to the negative battery terminal use a torque of 5.4 Nm (55 kgf-cm, 48 in-lbf).