How to install the Brake Light Switch for the hatchback on 2009 Toyota Yaris?

The stop light switch installation for hatchbacks requires inserting the switch into the adjuster until it reaches the brake pedal without activation then turning it clockwise by a quarter turn while applying a torque of 1.5 Nm (15 kgf-cm, 13 in-lbf). The installation process requires examination of stop light switch clearance that should measure between 0.5 to 2.6 mm (0.020 to 0.102 in.). Afterward, connect the stop light switch connector. Install the instrument panel under cover sub-assembly LH in the next step. Complete the connection of the cable to the negative battery terminal by tightening it to a torque value of 5.4 Nm (55 kgf-cm, 48 in-lbf).

OEM 2009 Toyota Yaris Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2009 Toyota Yaris Stoplamp Switch
Part Number: 84340-69025
$43.25 MSRP: $60.20
You Save: $16.95 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Stop Lamp; Brake Light Switch; Stoplight Switch
- Manufacturer Note: W(CRUISE CONTROL)
- Part Name Code: 84340
- Item Weight: 0.50 Pounds
- Item Dimensions: 14.2 x 12.1 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84340-69025
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Yaris Submodels:
- Base, S | 4 Cyl 1.5 L GAS

2009 Toyota Yaris Brake Light Switch

Looking for affordable OEM 2009 Toyota Yaris Brake Light Switch? Explore our comprehensive catalogue of genuine 2009 Toyota Yaris Brake Light Switch. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Yaris Brake Light Switch Parts Q&A

Q: How to install the Brake Light Switch for the hatchback on 2009 Toyota Yaris?
A: The stop light switch installation for hatchbacks requires inserting the switch into the adjuster until it reaches the brake pedal without activation then turning it clockwise by a quarter turn while applying a torque of 1.5 Nm (15 kgf-cm, 13 in-lbf). The installation process requires examination of stop light switch clearance that should measure between 0.5 to 2.6 mm (0.020 to 0.102 in.). Afterward, connect the stop light switch connector. Install the instrument panel under cover sub-assembly LH in the next step. Complete the connection of the cable to the negative battery terminal by tightening it to a torque value of 5.4 Nm (55 kgf-cm, 48 in-lbf).