How to install the outer mirror switch for the hatchback on 2010 Toyota Yaris?

The hatchback outer mirror switch installation process requires users to secure two claws and place the outer mirror switch assembly before connecting the connector. The instrument panel box requires installation as the next step. The negative end of the cable installation requires application of 5.4 Nm (55 kgf-cm, 48 in-lbf) torque during terminal connection.

OEM 2010 Toyota Yaris Mirror Switch

Power Mirror Control Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Mirror Switch found

View related parts
2010 Toyota Yaris Mirror Switch, Outer
Part Number: 84870-34010
$151.92 MSRP: $215.06
You Save: $63.14 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Outer Mirror; Door Mirror Switch, Front; Power Mirror Switch
- Position: Outer
- Part Name Code: 84870A
- Item Weight: 0.50 Pounds
- Item Dimensions: 14.1 x 11.7 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84870-34010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Toyota Yaris Submodels:
- Base, L, LE, S, SE | 4 Cyl 1.5 L GAS

2010 Toyota Yaris Mirror Switch

Looking for affordable OEM 2010 Toyota Yaris Mirror Switch? Explore our comprehensive catalogue of genuine 2010 Toyota Yaris Mirror Switch. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2010 Toyota Yaris Mirror Switch Parts Q&A

Q: How to install the outer mirror switch for the hatchback on 2010 Toyota Yaris?
A: The hatchback outer mirror switch installation process requires users to secure two claws and place the outer mirror switch assembly before connecting the connector. The instrument panel box requires installation as the next step. The negative end of the cable installation requires application of 5.4 Nm (55 kgf-cm, 48 in-lbf) torque during terminal connection.