How to install the heated oxygen sensor for Bank 2 Sensor 2 and what are the torque specifications on 2009 Toyota Sequoia?

The installation of Bank 2 Sensor 2 heated oxygen sensor requires Special Service Tool: 09224-00010 to meet torque requirements of 44 Nm (449 kgf-cm, 32 ft-lbf) without tool use or 40 Nm (408 kgf-cm, 30 ft-lbf) with tool attached. Utilize a torque wrench with 30 cm (11.8 in.) fulcrum length, adjust specifications for different length wrench usage, while keeping tool and wrench in direct alignment. The same steps should be used for Bank 1 Sensor 2 4WD installation including torque specifications. The heated oxygen sensor connector installation for Bank 1 Sensor 2 2WD should be performed following cable connection. The front No. 2 exhaust pipe assembly for 4WD must be installed followed by a check for exhaust gas leakage.

OEM 2009 Toyota Sequoia Oxygen Sensor

Oxygen O2 Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Oxygen Sensors found

View related parts
2009 Toyota Sequoia Oxygen Sensor, Driver Side
Part Number: 89465-0C180
$118.55 MSRP: $167.81
You Save: $49.26 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Oxygen; Oxygen Sensor, Rear Left; Rear Oxygen Sensor
- Manufacturer Note: LH
- Position: Driver Side
- Part Name Code: 89465
- Item Weight: 0.60 Pounds
- Item Dimensions: 7.2 x 3.6 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89465-0C180
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
- Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2009 Toyota Sequoia Oxygen Sensor, Passenger Side
Part Number: 89465-0C190
$119.72 MSRP: $169.48
You Save: $49.76 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Oxygen; Oxygen Sensor, Rear Right; Rear Oxygen Sensor
- Manufacturer Note: RH
- Position: Passenger Side
- Part Name Code: 89465
- Item Weight: 0.60 Pounds
- Item Dimensions: 7.4 x 3.5 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89465-0C190
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
- Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2009 Toyota Sequoia Sensor, Air Fuel Ratio, Front Driver Side
Part Number: 89467-04060
$187.09 MSRP: $267.11
You Save: $80.02 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Fuel Rat; Oxygen Sensor
- Position: Front Driver Side
- Replaces: 89467-35110
- Part Name Code: 89467B
- Item Weight: 0.50 Pounds
- Item Dimensions: 13.3 x 11.6 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89467-04060
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
- Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

2009 Toyota Sequoia Oxygen Sensor

Looking for affordable OEM 2009 Toyota Sequoia Oxygen Sensor? Explore our comprehensive catalogue of genuine 2009 Toyota Sequoia Oxygen Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Sequoia Parts Questions & Experts Answers

Q: How to install the heated oxygen sensor for Bank 2 Sensor 2 and what are the torque specifications on 2009 Toyota Sequoia?
A: The installation of Bank 2 Sensor 2 heated oxygen sensor requires Special Service Tool: 09224-00010 to meet torque requirements of 44 Nm (449 kgf-cm, 32 ft-lbf) without tool use or 40 Nm (408 kgf-cm, 30 ft-lbf) with tool attached. Utilize a torque wrench with 30 cm (11.8 in.) fulcrum length, adjust specifications for different length wrench usage, while keeping tool and wrench in direct alignment. The same steps should be used for Bank 1 Sensor 2 4WD installation including torque specifications. The heated oxygen sensor connector installation for Bank 1 Sensor 2 2WD should be performed following cable connection. The front No. 2 exhaust pipe assembly for 4WD must be installed followed by a check for exhaust gas leakage.