How to remove the heated oxygen sensor on 2008 Toyota Sequoia?

The process to remove the heated oxygen sensor requires two people to handle the task while wearing protective gloves because the exhaust pipe retains heat for some time after engine shutdown. Wait until complete cooldown before continuing. You should start by taking apart the front No. 2 exhaust pipe assembly that belongs to 4WD vehicles. The removal of Bank 1 Sensor 2 arises from disconnecting its heated oxygen sensor connector while using Special Service Tool: 09224-00010 to extract the sensor in 2WD vehicles. Special Service Tool: 09224-00010 is mandatory for Bank 1 Sensor 2 in 4WD due to its direct usage to uninstall the sensor. The heated oxygen sensor connector for Bank 2 Sensor 2 should be disconnected then the sensor can be detached using Special Service Tool: 09224-00010.

OEM 2008 Toyota Sequoia Oxygen Sensor

Oxygen O2 Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Oxygen Sensors found

View related parts
2008 Toyota Sequoia Oxygen Sensor, Driver Side
Part Number: 89465-0C180
$118.55 MSRP: $167.81
You Save: $49.26 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Oxygen; Oxygen Sensor, Rear Left; Rear Oxygen Sensor
- Manufacturer Note: LH
- Position: Driver Side
- Part Name Code: 89465
- Item Weight: 0.60 Pounds
- Item Dimensions: 7.2 x 3.6 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89465-0C180
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
- Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Sequoia Oxygen Sensor, Passenger Side
Part Number: 89465-0C190
$119.72 MSRP: $169.48
You Save: $49.76 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Oxygen; Oxygen Sensor, Rear Right; Rear Oxygen Sensor
- Manufacturer Note: RH
- Position: Passenger Side
- Part Name Code: 89465
- Item Weight: 0.60 Pounds
- Item Dimensions: 7.4 x 3.5 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89465-0C190
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
- Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Sequoia Sensor, Air Fuel Ratio, Front Driver Side
Part Number: 89467-04060
$187.09 MSRP: $267.11
You Save: $80.02 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Fuel Rat; Oxygen Sensor
- Position: Front Driver Side
- Replaces: 89467-35110
- Part Name Code: 89467B
- Item Weight: 0.50 Pounds
- Item Dimensions: 13.3 x 11.6 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89467-04060
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
- Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

2008 Toyota Sequoia Oxygen Sensor

Looking for affordable OEM 2008 Toyota Sequoia Oxygen Sensor? Explore our comprehensive catalogue of genuine 2008 Toyota Sequoia Oxygen Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Sequoia Parts Questions & Experts Answers

Q: How to remove the heated oxygen sensor on 2008 Toyota Sequoia?
A: The process to remove the heated oxygen sensor requires two people to handle the task while wearing protective gloves because the exhaust pipe retains heat for some time after engine shutdown. Wait until complete cooldown before continuing. You should start by taking apart the front No. 2 exhaust pipe assembly that belongs to 4WD vehicles. The removal of Bank 1 Sensor 2 arises from disconnecting its heated oxygen sensor connector while using Special Service Tool: 09224-00010 to extract the sensor in 2WD vehicles. Special Service Tool: 09224-00010 is mandatory for Bank 1 Sensor 2 in 4WD due to its direct usage to uninstall the sensor. The heated oxygen sensor connector for Bank 2 Sensor 2 should be disconnected then the sensor can be detached using Special Service Tool: 09224-00010.