How to install the heated oxygen sensor for Bank 2 Sensor 2 and what are the torque specifications on Toyota Sequoia?

The installation of Bank 2 Sensor 2 heated oxygen sensor requires Special Service Tool: 09224-00010 to meet torque requirements of 44 Nm (449 kgf-cm, 32 ft-lbf) without tool use or 40 Nm (408 kgf-cm, 30 ft-lbf) with tool attached. Utilize a torque wrench with 30 cm (11.8 in.) fulcrum length, adjust specifications for different length wrench usage, while keeping tool and wrench in direct alignment. The same steps should be used for Bank 1 Sensor 2 4WD installation including torque specifications. The heated oxygen sensor connector installation for Bank 1 Sensor 2 2WD should be performed following cable connection. The front No. 2 exhaust pipe assembly for 4WD must be installed followed by a check for exhaust gas leakage.

How to remove the heated oxygen sensor safely and effectively on Toyota Sequoia?

Both persons must handle the heated oxygen sensor removal task because the exhaust pipe remains dangerously hot following engine shutdown so verify cooling before work begins while protecting your hands with gloves. Start the heated oxygen sensor removal by taking off the front No. 2 exhaust pipe assembly for the 4WD model. The sensor removal process for Bank 1 Sensor 2 on the 2WD includes disconnecting its connector then using Special Service Tool: 09224-00010 to finish the task. To remove Bank 1 Sensor 2 on the 4WD model you must directly employ Special Service Tool: 09224-00010. Use Special Service Tool: 09224-00010 to remove the Bank 2 Sensor 2 after disconnecting its heated oxygen sensor connector.

OEM Toyota Sequoia Oxygen Sensor

Oxygen O2 Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

23 Oxygen Sensors found

View related parts
Toyota Sequoia Oxygen Sensor, Rear Passenger Side
Part Number: 89465-09310
$118.90 MSRP: $168.31
You Save: $49.41 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Oxygen; Oxygen Sensor, Rear Right; Rear Oxygen Sensor
- Manufacturer Note: REAR RH
- Position: Rear Passenger Side
- Replaces: 89465-09180
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2004 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Oxygen Sensor, Passenger Side
Part Number: 89467-0C050
$214.46 MSRP: $306.20
You Save: $91.74 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Fuel Rat; Oxygen Sensor, Front Right; Air-Fuel Ratio Sensor; Air/Fuel Sensor; Front Oxygen Sensor; Sensor, Air Fuel Ratio
- Manufacturer Note: RH
- Position: Passenger Side
- Replaces: 89467-22030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2013-2015 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Oxygen Sensor
Part Number: 89467-0C010
$213.42 MSRP: $304.71
You Save: $91.29 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Fuel Rat; Front Oxygen Sensor; Sensor, Air Fuel Ratio
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Sensor, Air Fuel Ratio, Front Driver Side
Part Number: 89467-04060
$188.60 MSRP: $269.28
You Save: $80.68 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Fuel Rat; Oxygen Sensor
- Position: Front Driver Side
- Replaces: 89467-35110
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2014 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Oxygen Sensor, Front Passenger Side
Part Number: 89465-0C150
$110.31 MSRP: $154.85
You Save: $44.54 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Oxygen; Oxygen Sensor, Front Right; Front Oxygen Sensor
- Position: Front Passenger Side
- Replaces: 89465-34130
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2004 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Oxygen Sensor, Driver Side
Part Number: 89465-0C180
$122.19 MSRP: $172.97
You Save: $50.78 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Oxygen; Oxygen Sensor, Rear Left; Rear Oxygen Sensor
- Manufacturer Note: LH
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2014 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Oxygen Sensor, Passenger Side
Part Number: 89465-0C260
$135.23 MSRP: $191.43
You Save: $56.20 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Oxygen; Oxygen Sensor, Rear Right; Rear Oxygen Sensor
- Manufacturer Note: RH
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2018-2022 Toyota Sequoia | Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Oxygen Sensor, Passenger Side
Part Number: 89467-0C070
$187.79 MSRP: $268.12
You Save: $80.33 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Fuel Rat; Oxygen Sensor, Front Right; Front Oxygen Sensor; Sensor, Air Fuel Ratio
- Manufacturer Note: RH
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014-2022 Toyota Sequoia | Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Oxygen Sensor, Front Driver Side
Part Number: 89465-0C140
$122.07 MSRP: $172.81
You Save: $50.74 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Oxygen; Oxygen Sensor, Front Left; Front Oxygen Sensor
- Position: Front Driver Side
- Replaces: 89465-34120
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2004 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Oxygen Sensor
Part Number: 89465-0C160
$127.36 MSRP: $180.29
You Save: $52.93 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Oxygen; Rear Oxygen Sensor
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Oxygen Sensor, Passenger Side
Part Number: 89465-0C190
$125.71 MSRP: $177.96
You Save: $52.25 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Oxygen; Oxygen Sensor, Rear Right; Rear Oxygen Sensor
- Manufacturer Note: RH
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2014 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Oxygen Sensor, Driver Side
Part Number: 89465-0C250
$132.53 MSRP: $187.61
You Save: $55.08 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Oxygen; Oxygen Sensor, Rear Left; Rear Oxygen Sensor
- Manufacturer Note: LH
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2018-2022 Toyota Sequoia | Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Oxygen Sensor, Rear
Part Number: 89465-09320
$114.10 MSRP: $160.17
You Save: $46.07 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Oxygen; Oxygen Sensor, Rear Left, Rear Right; Rear Oxygen Sensor
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2004 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Sensor, Oxygen, Driver Side
Part Number: 89465-0C290
$118.37 MSRP: $166.15
You Save: $47.78 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Oxygen Sensor
- Manufacturer Note: LH
- Position: Driver Side
- Replaces: 89465-34160
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014-2017 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Oxygen Sensor, Passenger Side
Part Number: 89465-0C300
$119.84 MSRP: $169.64
You Save: $49.80 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Oxygen; Oxygen Sensor, Rear Right; Rear Oxygen Sensor
- Manufacturer Note: RH
- Position: Passenger Side
- Replaces: 89465-34170
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014-2017 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Oxygen Sensor
Part Number: 89467-0C100
$158.26 MSRP: $224.04
You Save: $65.78 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Fuel Rat; Rear Oxygen Sensor; Sensor, Air Fuel Ratio
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023-2024 Toyota Sequoia | Capstone, Limited, Platinum, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Sequoia Oxygen Sensor, Front Driver Side
Part Number: 89467-0C130
$167.43 MSRP: $237.01
You Save: $69.58 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Fuel Rat; Oxygen Sensor, Front Left; Front Oxygen Sensor; Sensor, Air Fuel Ratio
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023-2024 Toyota Sequoia | Capstone, Limited, Platinum, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Sequoia Oxygen Sensor
Part Number: 89467-0C090
$169.07 MSRP: $239.34
You Save: $70.27 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Fuel Rat; Rear Oxygen Sensor; Sensor, Air Fuel Ratio
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023-2024 Toyota Sequoia | Capstone, Limited, Platinum, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Sequoia Oxygen Sensor, Front Passenger Side
Part Number: 89467-0C140
$155.09 MSRP: $219.54
You Save: $64.45 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Fuel Rat; Oxygen Sensor, Front Right; Front Oxygen Sensor; Sensor, Air Fuel Ratio
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023-2024 Toyota Sequoia | Capstone, Limited, Platinum, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Sequoia Oxygen Sensor, Passenger Side
Part Number: 89467-0C030
$198.74 MSRP: $283.75
You Save: $85.01 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Fuel Rat; Oxygen Sensor, Front Right; Front Oxygen Sensor; Sensor, Air Fuel Ratio
- Manufacturer Note: RH
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2014 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

| Page 1 of 2 |Next >

1-20 of 23 Results

Toyota Sequoia Oxygen Sensor

Choose genuine Oxygen Sensor that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Oxygen Sensor for your Toyota Sequoia? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Sequoia parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

The Oxygen Sensor affects the Toyota Sequoia since it is important in monitoring the unburned oxygen levels within the engine exhaust in order to pass feedback to the engine control computer. This sensor produces a voltage signal in proportion to the richness or leanness of the mixture and thereby helps the computer alter the fuel injector timing in order to achieve optimum combustion efficiency and minimum emissions. The Toyota Sequoia production models use zirconium dioxide, oxygen sensors and may come with both an upstream and a downstream sensor. The upstream sensor is used for real time changes and the downstream sensor is used mainly to assess the working of the catalytic converter. Later designs could also have wide-band air/fuel ratio sensors which provide a wider spanning and more accurate information than the oxygen sensors. Both of them have issues of contamination and degradation with time, which may affect their performance and increase the rate of emissions if not well checked.

Toyota Sequoia Oxygen Sensor Parts and Q&A

Oxygen Sensor, Driver Side
89465-0C180
Q: How to install the heated oxygen sensor for Bank 2 Sensor 2 and what are the torque specifications on Toyota Sequoia?
A:
The installation of Bank 2 Sensor 2 heated oxygen sensor requires Special Service Tool: 09224-00010 to meet torque requirements of 44 Nm (449 kgf-cm, 32 ft-lbf) without tool use or 40 Nm (408 kgf-cm, 30 ft-lbf) with tool attached. Utilize a torque wrench with 30 cm (11.8 in.) fulcrum length, adjust specifications for different length wrench usage, while keeping tool and wrench in direct alignment. The same steps should be used for Bank 1 Sensor 2 4WD installation including torque specifications. The heated oxygen sensor connector installation for Bank 1 Sensor 2 2WD should be performed following cable connection. The front No. 2 Exhaust Pipe assembly for 4WD must be installed followed by a check for exhaust gas leakage.
Oxygen Sensor, Passenger Side
89465-0C190
Q: How to remove the heated oxygen sensor safely and effectively on Toyota Sequoia?
A:
Both persons must handle the heated oxygen sensor removal task because the Exhaust Pipe remains dangerously hot following engine shutdown so verify cooling before work begins while protecting your hands with gloves. Start the heated oxygen sensor removal by taking off the front No. 2 exhaust pipe assembly for the 4WD model. The sensor removal process for Bank 1 Sensor 2 on the 2WD includes disconnecting its connector then using Special Service Tool: 09224-00010 to finish the task. To remove Bank 1 Sensor 2 on the 4WD model you must directly employ Special Service Tool: 09224-00010. Use Special Service Tool: 09224-00010 to remove the Bank 2 Sensor 2 after disconnecting its heated oxygen sensor connector.

Related Toyota Sequoia Parts

Browse Toyota Sequoia Oxygen Sensor by Years

2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001