How to install the knock sensors on 2008 Toyota Sequoia?

Clients should install 2 knock sensors by applying 2 nuts at 20 Nm torque (204 kgf-cm, 15 ft-lbf). You should then link the 2 knock sensor connectors. The technician should install the No. 4 air injection system hose then the water by-pass pipe sub-assembly. Install the entire intake manifold assembly as the concluding installation step.

OEM 2008 Toyota Sequoia Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
2008 Toyota Sequoia Knock Sensor
Part Number: 89615-06010
$138.05 MSRP: $195.42
You Save: $57.37 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Knock Control; Ignition Knock (Detonation) Sensor
- Replaces: 89615-BZ030, 89615-20090, 89615-BZ040
- Part Name Code: 89615
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.1 x 1.9 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89615-06010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
- Capstone, Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

2008 Toyota Sequoia Knock Sensor

Looking for affordable OEM 2008 Toyota Sequoia Knock Sensor? Explore our comprehensive catalogue of genuine 2008 Toyota Sequoia Knock Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Sequoia Knock Sensor Parts Q&A

Q: How to install the knock sensors on 2008 Toyota Sequoia?
A: Clients should install 2 knock sensors by applying 2 nuts at 20 Nm torque (204 kgf-cm, 15 ft-lbf). You should then link the 2 knock sensor connectors. The technician should install the No. 4 air injection system hose then the water by-pass pipe sub-assembly. Install the entire intake manifold assembly as the concluding installation step.

Related 2008 Toyota Sequoia Parts

Alternate Year Models

2007 Toyota Sequoia Knock Sensor 2009 Toyota Sequoia Knock Sensor