How to install the knock sensors on 2009 Toyota Sequoia?

Two knock sensors installed on the 2UZ-FE engine must be secured with 2 nuts that require a torque of 20 Nm (204 kgf-cm, 15 ft-lbf). After installation of the 2 knock sensors use 2 nuts to fasten them properly with 20 Nm (204 kgf-cm, 15 ft-lbf) torque. Then connect the 2 knock sensor connectors. Proceed by installing the No. 4 air injection system hose together with the water by-pass pipe sub-assembly. Place the intake manifold assembly as the last step.

OEM 2009 Toyota Sequoia Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
2009 Toyota Sequoia Knock Sensor
Part Number: 89615-06010
$138.05 MSRP: $195.42
You Save: $57.37 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Knock Control; Ignition Knock (Detonation) Sensor
- Replaces: 89615-BZ030, 89615-20090, 89615-BZ040
- Part Name Code: 89615
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.1 x 1.9 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89615-06010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
- Capstone, Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

2009 Toyota Sequoia Knock Sensor

Looking for affordable OEM 2009 Toyota Sequoia Knock Sensor? Explore our comprehensive catalogue of genuine 2009 Toyota Sequoia Knock Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Sequoia Parts Questions & Experts Answers

Q: How to install the knock sensors on 2009 Toyota Sequoia?
A: Two knock sensors installed on the 2UZ-FE engine must be secured with 2 nuts that require a torque of 20 Nm (204 kgf-cm, 15 ft-lbf). After installation of the 2 knock sensors use 2 nuts to fasten them properly with 20 Nm (204 kgf-cm, 15 ft-lbf) torque. Then connect the 2 knock sensor connectors. Proceed by installing the No. 4 air injection system hose together with the water by-pass pipe sub-assembly. Place the intake manifold assembly as the last step.

Related 2009 Toyota Sequoia Parts

Alternate Year Models

2008 Toyota Sequoia Knock Sensor 2010 Toyota Sequoia Knock Sensor