How to install the Air Bag sensor assembly on 2009 Toyota Sequoia?

The Air Bag sensor assembly installation process starts with turning off the ignition and disconnecting the negative battery terminal because skipping this step can activate the Air Bag system. Disabling the SRS system requires 90 seconds of waiting time after disconnecting the negative battery terminal. The Air Bag sensor installation requires 3 bolts which must receive a torque value of 18 Nm (184 kgf-cm, 13 ft-lbf) while confirming that both drop damage and impact events did not affect the sensor. The procedure requires checking for carpet interference with the installation plane and inspecting sensor looseness by front Air Bag sensor movements then applying the connector holder to secure the lever while ensuring complete lock. Check that the drip-proof sheet retains its shape without interfering with the connectors between them. Next sequence the installation of the front console box and rear console box assembly followed by console box carpet then rear console box pocket before proceeding with rear upper console panel sub-assembly and upper console panel sub-assembly then shift lever knob sub-assembly before doing lower instrument panel finish panel sub-assembly LH along with hood lock control lever sub-assembly instrument side panel LH front door opening trim Weather Strip LH front pillar garnish LH cowl side trim board LH and finally front door scuff plate LH. The cable connection process ends when technicians begin by reconnecting it to the negative battery terminal then tightening it to 5.4 Nm (55 kgf-cm, 48 in-lbf) torque specification while checking the SRS warning light operates correctly.

OEM 2009 Toyota Sequoia Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Air Bag Sensors found

View related parts
2009 Toyota Sequoia Front Impact Sensor
Part Number: 89173-09480
$93.84 MSRP: $113.14
You Save: $19.30 (18%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Bag, Front; Air Bag Impact Sensor, Front; Air Bag Sensor; Front Sensor; Sensor, Air Bag, Front Passenger Side; Sensor, Air Bag, Front Driver Side
- Position: Front
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.7 x 3.0 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89173-09480
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
- Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2009 Toyota Sequoia Position Sensor
Part Number: 89178-06040
$79.24 MSRP: $111.22
You Save: $31.98 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Seat Position; Front Left, Right, Left Track; Air Bag Seat Mat; Occupant Detection.; Air Bag Sensor; Occupant Sensor; Sensor; Sensor, Seat Position Air Bag
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.1 x 1.5 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89178-06040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
- Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2009 Toyota Sequoia Position Sensor, Passenger Side
Part Number: 89178-06030
$79.24 MSRP: $111.22
You Save: $31.98 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Seat Position; Seat Track Position Sensor, Front/Right/Left; Air Bag Seat Sensor Mat; Occupant Detection Sensor; Air Bag Sensor; Occupant Sensor; Sensor, Seat Position Air Bag
- Position: Passenger Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.0 x 1.6 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89178-06030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
- Capstone, Limited, Platinum, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2009 Toyota Sequoia Side Impact Sensor
Part Number: 89831-0C050
$97.87 MSRP: $118.00
You Save: $20.13 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Side Air Bag; Air Bag Sensor; Side Sensor; Sensor Assembly, Side Air Bag, Passenger Side; Sensor Assembly, Side Air Bag, Driver Side
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.2 x 2.6 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89831-0C050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
- Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2009 Toyota Sequoia Side Impact Sensor
Part Number: 89831-0C060
$122.54 MSRP: $173.47
You Save: $50.93 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Side Air Bag; Air Bag Sensor; Side Sensor; Sensor, Air Bag, Rear Passenger Side; Sensor, Air Bag, Rear Driver Side
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.2 x 2.5 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89831-0C060
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
- Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

2009 Toyota Sequoia Air Bag Sensor

Looking for affordable OEM 2009 Toyota Sequoia Air Bag Sensor? Explore our comprehensive catalogue of genuine 2009 Toyota Sequoia Air Bag Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Sequoia Parts Questions & Experts Answers

Q: How to install the Air Bag sensor assembly on 2009 Toyota Sequoia?
A: The Air Bag sensor assembly installation process starts with turning off the ignition and disconnecting the negative battery terminal because skipping this step can activate the Air Bag system. Disabling the SRS system requires 90 seconds of waiting time after disconnecting the negative battery terminal. The Air Bag sensor installation requires 3 bolts which must receive a torque value of 18 Nm (184 kgf-cm, 13 ft-lbf) while confirming that both drop damage and impact events did not affect the sensor. The procedure requires checking for carpet interference with the installation plane and inspecting sensor looseness by front Air Bag sensor movements then applying the connector holder to secure the lever while ensuring complete lock. Check that the drip-proof sheet retains its shape without interfering with the connectors between them. Next sequence the installation of the front console box and rear console box assembly followed by console box carpet then rear console box pocket before proceeding with rear upper console panel sub-assembly and upper console panel sub-assembly then shift lever knob sub-assembly before doing lower instrument panel finish panel sub-assembly LH along with hood lock control lever sub-assembly instrument side panel LH front door opening trim Weather Strip LH front pillar garnish LH cowl side trim board LH and finally front door scuff plate LH. The cable connection process ends when technicians begin by reconnecting it to the negative battery terminal then tightening it to 5.4 Nm (55 kgf-cm, 48 in-lbf) torque specification while checking the SRS warning light operates correctly.