How to remove the Air Bag Control Module on 2009 Toyota Sequoia?

The first step to remove the Air Bag Control Module requires disconnection of the negative battery cable followed by a minimum 90-second disablement of the SRS system. A few systems within this procedure might need initialization following the reconnecting of the cable. The service technician must uninstall the front door scuff plate LH, cowl side trim board LH, front door opening trim Weather Strip LH, front pillar garnish LH, instrument side panel LH, hood lock control lever sub-assembly, lower instrument panel finish panel sub-assembly LH, shift lever knob sub-assembly, upper console panel sub-assembly, rear upper console panel sub-assembly, rear console box pocket, console box carpet, rear console box assembly and front console box from the vehicle. After disconnecting the negative battery terminal researchers should pull the lever down to unplug the connector holder before removing the Air Bag sensor assembly by removing 3 bolts.

OEM 2009 Toyota Sequoia Air Bag Control Module

SRS Airbag Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Air Bag Control Modules found

View related parts
2009 Toyota Sequoia Control Module, Passenger Side
Part Number: 89952-35020
$380.94 MSRP: $558.27
You Save: $177.33 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Computer, Occupant Detection; Air Bag Passenger Presence Module, Front Right, Right; Occupant Detection Sensor; Occupant Sensor; Passenger Discriminating Sensor; Occupant Module; Computer
- Position: Passenger Side
- Replaces: 89952-35010, 89952-35011
- Part Name Code: 89952
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89952-35020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
- Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2009 Toyota Sequoia Diag Unit W/Sensor
Part Number: 89170-0C410
$414.39 MSRP: $521.63
You Save: $107.24 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Air Bag; Air Bag Control Module; Air Bag Sensor; Center Sensor; Computer Assembly, Air Bag
- Part Name Code: 89170A
- Item Weight: 1.60 Pounds
- Item Dimensions: 7.6 x 6.6 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89170-0C410
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
- Limited, Platinum, SR5 | 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

2009 Toyota Sequoia Air Bag Control Module

Looking for affordable OEM 2009 Toyota Sequoia Air Bag Control Module? Explore our comprehensive catalogue of genuine 2009 Toyota Sequoia Air Bag Control Module. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Sequoia Parts Questions & Experts Answers

Q: How to remove the Air Bag Control Module on 2009 Toyota Sequoia?
A: The first step to remove the Air Bag Control Module requires disconnection of the negative battery cable followed by a minimum 90-second disablement of the SRS system. A few systems within this procedure might need initialization following the reconnecting of the cable. The service technician must uninstall the front door scuff plate LH, cowl side trim board LH, front door opening trim Weather Strip LH, front pillar garnish LH, instrument side panel LH, hood lock control lever sub-assembly, lower instrument panel finish panel sub-assembly LH, shift lever knob sub-assembly, upper console panel sub-assembly, rear upper console panel sub-assembly, rear console box pocket, console box carpet, rear console box assembly and front console box from the vehicle. After disconnecting the negative battery terminal researchers should pull the lever down to unplug the connector holder before removing the Air Bag sensor assembly by removing 3 bolts.